HAYASHI Kentaro
hayas****@clear*****
Tue Aug 19 12:24:19 JST 2014
On Tue, 19 Aug 2014 12:20:22 +0900 YUKI Hiroshi <yuki****@clear*****> wrote: > > > > fishだと {$x}は動くみたいですよ。 ↑うっかり途中で送ってしまったので最後まで書いておくと fishはさすがにサポートせんでよいのではと思いました。理由は↓と同じです。 > チュートリアルには、実践を楽にするために、なるべくいろんな環境でそのまま > 使えるコマンドラインを置いておきたいので、bashやdashで動かない（もしくは > 一般的でない）表現は避けたいと思っています。 > こう書いてしまうと、逆にbash/dashでは意味が変わってしまって期待通りの結 > 果にならないですよね。 > > > HAYASHI Kentaro wrote: > > > > fishだと {$x}は動くみたいですよ。 > > > > On Tue, 19 Aug 2014 12:13:09 +0900 > > YUKI Hiroshi <yuki****@clear*****> wrote: > > > >> http://ja.wikipedia.org/wiki/Friendly_interactive_shell > >> これによると、$()も${}も無いということのようですねぇ > >> > >> YUKI Hiroshi wrote: > >>> fish 2.1.0 だそうです。 > >>> > >>> Kenji Okimoto wrote: > >>>> > >>>> > >>>> On 2014年08月19日 11:53, YUKI Hiroshi wrote: > >>>>> 新美さんが使ってるシェルでは動かないらしいんです。。。 > >>>> > >>>> 何を使ってるんでしょうか？ > >>>> 参考までに、バージョン込みで教えて欲しいです。 > >>>> > >>>>> > >>>>> Kouhei Sutou wrote: > >>>>>> dashでもいけるから大丈夫じゃない！？ > >>>>>> > >>>>>> % dash > >>>>>> $ endpoint=x > >>>>>> $ echo "a${endpoint}c" > >>>>>> axc > >>>>>> > >>>>>> > >>>>>> In <20140****@clear*****> > >>>>>> "Re: [Groonga-commit] droonga/droonga.org at a66a101 [gh-pages] Don't use "${...}" style (it doesn't work some shells)" on Tue, 19 Aug 2014 11:50:34 +0900 (JST), > >>>>>> Kouhei Sutou <kou****@clear*****> wrote: > >>>>>> > >>>>>>>> Don't use "${...}" style (it doesn't work some shells) > >>>>>>> > >>>>>>> え！？そうなの！？ > >>>>>>> > >>>>>>> In <a66a1****@jenki*****> > >>>>>>> "[Groonga-commit] droonga/droonga.org at a66a101 [gh-pages] Don't use "${...}" style (it doesn't work some shells)" on Tue, 19 Aug 2014 11:39:15 +0900, > >>>>>>> YUKI Hiroshi <null+****@clear*****> wrote: > >>>>>>> > >>>>>>>> YUKI Hiroshi 2014-08-19 11:39:15 +0900 (Tue, 19 Aug 2014) > >>>>>>>> > >>>>>>>> New Revision: a66a101c6a14cae0d252c995190c8c7fd78cb508 > >>>>>>>> https://github.com/droonga/droonga.org/commit/a66a101c6a14cae0d252c995190c8c7fd78cb508 > >>>>>>>> > >>>>>>>> Message: > >>>>>>>> Don't use "${...}" style (it doesn't work some shells) > >>>>>>>> > >>>>>>>> Modified files: > >>>>>>>> tutorial/1.0.6/dump-restore/index.md > >>>>>>>> tutorial/1.0.6/groonga/index.md > >>>>>>>> > >>>>>>>> Modified: tutorial/1.0.6/dump-restore/index.md (+9 -9) > >>>>>>>> =================================================================== > >>>>>>>> --- tutorial/1.0.6/dump-restore/index.md 2014-08-14 18:46:29 +0900 (335931a) > >>>>>>>> +++ tutorial/1.0.6/dump-restore/index.md 2014-08-19 11:39:15 +0900 (1d7b523) > >>>>>>>> @@ -141,19 +141,19 @@ If you are reading this tutorial sequentially, you'll have an existing cluster a > >>>>>>>> Make it empty with these commands: > >>>>>>>> > >>>>>>>> # endpoint="http://192.168.0.10:10041" > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Location" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Location" > >>>>>>>> [[0,1406610703.2229023,0.0010793209075927734],true] > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Store" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Store" > >>>>>>>> [[0,1406610708.2757723,0.006396293640136719],true] > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Term" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Term" > >>>>>>>> [[0,1406610712.379644,0.00006723403930664062],true] > >>>>>>>> > >>>>>>>> After that the cluster becomes empty. Confirm it: > >>>>>>>> > >>>>>>>> # endpoint="http://192.168.0.10:10041" > >>>>>>>> - # curl "${endpoint}/d/table_list" > >>>>>>>> + # curl "$endpoint/d/table_list" > >>>>>>>> [[0,1406610804.1535122,0.0002875328063964844],[[["id","UInt32"],["name","ShortText"],["path","ShortText"],["flags","ShortText"],["domain","ShortText"],["range","ShortText"],["default_tokenizer","ShortText"],["normalizer","ShortText"]]]] > >>>>>>>> - # curl "${endpoint}/d/select?table=Store&output_columns=name&limit=10" > >>>>>>>> + # curl "$endpoint/d/select?table=Store&output_columns=name&limit=10" > >>>>>>>> [[0,1401363465.610241,0],[[[null],[]]]] > >>>>>>>> > >>>>>>>> ### Restore data from a dump result, to an empty Droonga cluster > >>>>>>>> @@ -176,7 +176,7 @@ Note to these things: > >>>>>>>> > >>>>>>>> Then the data is completely restored. Confirm it: > >>>>>>>> > >>>>>>>> - # ${endpoint}/select?table=Store&output_columns=name&limit=10" > >>>>>>>> + # $endpoint/select?table=Store&output_columns=name&limit=10" > >>>>>>>> [[0,1401363556.0294158,0.0000762939453125],[[[40],[["name","ShortText"]],["1st Avenue & 75th St. - New York NY (W)"],["76th & Second - New York NY (W)"],["Herald Square- Macy's - New York NY"],["Macy's 5th Floor - Herald Square - New York NY (W)"],["80th & York - New York NY (W)"],["Columbus @ 67th - New York NY (W)"],["45th & Broadway - New York NY (W)"],["Marriott Marquis - Lobby - New York NY"],["Second @ 81st - New York NY (W)"],["52nd & Seventh - New York NY (W)"]]]] > >>>>>>>> > >>>>>>>> ## Duplicate an existing Droonga cluster to another empty cluster directly > >>>>>>>> @@ -204,9 +204,9 @@ Construct two clusters by `droonga-engine-catalog-modify` and make one cluster e > >>>>>>>> --update \ > >>>>>>>> --replica-hosts=$host > >>>>>>>> # endpoint="http://$host:10041" > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Location" > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Store" > >>>>>>>> - # curl "${endpoint}/d/table_remove?name=Term" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Location" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Store" > >>>>>>>> + # curl "$endpoint/d/table_remove?name=Term" > >>>>>>>> > >>>>>>>> After that there are two clusters: one contains `192.168.0.10` with data, another contains `192.168.0.11` with no data. Confirm it: > >>>>>>>> > >>>>>>>> > >>>>>>>> Modified: tutorial/1.0.6/groonga/index.md (+12 -12) > >>>>>>>> =================================================================== > >>>>>>>> --- tutorial/1.0.6/groonga/index.md 2014-08-14 18:46:29 +0900 (2c50b5e) > >>>>>>>> +++ tutorial/1.0.6/groonga/index.md 2014-08-19 11:39:15 +0900 (7ddfacb) > >>>>>>>> @@ -193,7 +193,7 @@ Requests are completely same to ones for a Groonga server. > >>>>>>>> To create a new table `Store`, you just have to send a GET request for the `table_create` command, like: > >>>>>>>> > >>>>>>>> # endpoint="http://192.168.0.10:10041" > >>>>>>>> - # curl "${endpoint}/d/table_create?name=Store&flags=TABLE_PAT_KEY&key_type=ShortText" > >>>>>>>> + # curl "$endpoint/d/table_create?name=Store&flags=TABLE_PAT_KEY&key_type=ShortText" > >>>>>>>> [[0,1401358896.360356,0.0035653114318847656],true] > >>>>>>>> > >>>>>>>> Note that you have to specify the host, one of Droonga nodes with active droonga-http-server, in your Droonga cluster. > >>>>>>>> @@ -202,20 +202,20 @@ All requests will be distributed to suitable nodes in the cluster. > >>>>>>>> > >>>>>>>> Next, create new columns `name` and `location` to the `Store` table by the `column_create` command, like: > >>>>>>>> > >>>>>>>> - # curl "${endpoint}/d/column_create?table=Store&name=name&flags=COLUMN_SCALAR&type=ShortText" > >>>>>>>> + # curl "$endpoint/d/column_create?table=Store&name=name&flags=COLUMN_SCALAR&type=ShortText" > >>>>>>>> [[0,1401358348.6541538,0.0004096031188964844],true] > >>>>>>>> - # curl "${endpoint}/d/column_create?table=Store&name=location&flags=COLUMN_SCALAR&type=WGS84GeoPoint" > >>>>>>>> + # curl "$endpoint/d/column_create?table=Store&name=location&flags=COLUMN_SCALAR&type=WGS84GeoPoint" > >>>>>>>> [[0,1401358359.084659,0.002511262893676758],true],true] > >>>>>>>> > >>>>>>>> Create indexes also. > >>>>>>>> > >>>>>>>> - # curl "${endpoint}/d/table_create?name=Term&flags=TABLE_PAT_KEY&key_type=ShortText&default_tokenizer=TokenBigram&normalizer=NormalizerAuto" > >>>>>>>> + # curl "$endpoint/d/table_create?name=Term&flags=TABLE_PAT_KEY&key_type=ShortText&default_tokenizer=TokenBigram&normalizer=NormalizerAuto" > >>>>>>>> [[0,1401358475.7229664,0.002419710159301758],true] > >>>>>>>> - # curl "${endpoint}/d/column_create?table=Term&name=store_name&flags=COLUMN_INDEX|WITH_POSITION&type=Store&source=name" > >>>>>>>> + # curl "$endpoint/d/column_create?table=Term&name=store_name&flags=COLUMN_INDEX|WITH_POSITION&type=Store&source=name" > >>>>>>>> [[0,1401358494.1656318,0.006799221038818359],true] > >>>>>>>> - # curl "${endpoint}/d/table_create?name=Location&flags=TABLE_PAT_KEY&key_type=WGS84GeoPoint" > >>>>>>>> + # curl "$endpoint/d/table_create?name=Location&flags=TABLE_PAT_KEY&key_type=WGS84GeoPoint" > >>>>>>>> [[0,1401358505.708896,0.0016951560974121094],true] > >>>>>>>> - # curl "${endpoint}/d/column_create?table=Location&name=store&flags=COLUMN_INDEX&type=Store&source=location" > >>>>>>>> + # curl "$endpoint/d/column_create?table=Location&name=store&flags=COLUMN_INDEX&type=Store&source=location" > >>>>>>>> [[0,1401358519.6187897,0.024788379669189453],true] > >>>>>>>> > >>>>>>>> *IMPORTANT NOTE*: Don't run `table_list` or `column_list` before the table is completely created. > >>>>>>>> @@ -225,7 +225,7 @@ This is a known issue on the version {{ site.droonga_version }}, and it will be > >>>>>>>> OK, now the table has been created successfully. > >>>>>>>> Let's see it by the `table_list` command: > >>>>>>>> > >>>>>>>> - # curl "${endpoint}/d/table_list" > >>>>>>>> + # curl "$endpoint/d/table_list" > >>>>>>>> [[0,1401358908.9126804,0.001600027084350586],[[["id","UInt32"],["name","ShortText"],["path","ShortText"],["flags","ShortText"],["domain","ShortText"],["range","ShortText"],["default_tokenizer","ShortText"],["normalizer","ShortText"]],[256,"Store","/home/vagrant/droonga/000/db.0000100","TABLE_PAT_KEY|PERSISTENT","ShortText",null,null,null]]] > >>>>>>>> > >>>>>>>> Because it is a cluster, another endpoint returns same result. > >>>>>>>> @@ -288,7 +288,7 @@ stores.json: > >>>>>>>> > >>>>>>>> Then, send it as a POST request of the `load` command, like: > >>>>>>>> > >>>>>>>> - # curl --data "@stores.json" "${endpoint}/d/load?table=Store" > >>>>>>>> + # curl --data "@stores.json" "$endpoint/d/load?table=Store" > >>>>>>>> [[0,1401358564.909,0.158],[40]] > >>>>>>>> > >>>>>>>> Now all data in the JSON file are successfully loaded. > >>>>>>>> @@ -299,14 +299,14 @@ OK, all data is now ready. > >>>>>>>> > >>>>>>>> As the starter, let's select initial ten records with the `select` command: > >>>>>>>> > >>>>>>>> - # curl "${endpoint}/d/select?table=Store&output_columns=name&limit=10" > >>>>>>>> + # curl "$endpoint/d/select?table=Store&output_columns=name&limit=10" > >>>>>>>> [[0,1401362059.7437818,0.00004935264587402344],[[[40],[["name","ShortText"]],["1st Avenue & 75th St. - New York NY (W)"],["76th & Second - New York NY (W)"],["Herald Square- Macy's - New York NY"],["Macy's 5th Floor - Herald Square - New York NY (W)"],["80th & York - New York NY (W)"],["Columbus @ 67th - New York NY (W)"],["45th & Broadway - New York NY (W)"],["Marriott Marquis - Lobby - New York NY"],["Second @ 81st - New York NY (W)"],["52nd & Seventh - New York NY (W)"]]]] > >>>>>>>> > >>>>>>>> Of course you can specify conditions via the `query` option: > >>>>>>>> > >>>>>>>> - # curl "${endpoint}/d/select?table=Store&query=Columbus&match_columns=name&output_columns=name&limit=10" > >>>>>>>> + # curl "$endpoint/d/select?table=Store&query=Columbus&match_columns=name&output_columns=name&limit=10" > >>>>>>>> [[0,1398670157.661574,0.0012705326080322266],[[[2],[["_key","ShortText"]],["Columbus @ 67th - New York NY (W)"],["2 Columbus Ave. - New York NY (W)"]]]] > >>>>>>>> - # curl "${endpoint}/d/select?table=Store&filter=name@'Ave'&output_columns=name&limit=10" > >>>>>>>> + # curl "$endpoint/d/select?table=Store&filter=name@'Ave'&output_columns=name&limit=10" > >>>>>>>> [[0,1398670586.193325,0.0003848075866699219],[[[3],[["_key","ShortText"]],["2nd Ave. & 9th Street - New York NY"],["84th & Third Ave - New York NY (W)"],["2 Columbus Ave. - New York NY (W)"]]]] > >>>>>>>> > >>>>>>>> ## Conclusion > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Groonga-commit mailing list > >>>>>>> Groon****@lists***** > >>>>>>> http://lists.sourceforge.jp/mailman/listinfo/groonga-commit > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Groonga-commit mailing list > >>>>>> Groon****@lists***** > >>>>>> http://lists.sourceforge.jp/mailman/listinfo/groonga-commit > >>>>>> > >>>>> > >>>> > >>> > >> > >> -- > >> 結城 洋志 <YUKI Hiroshi> > >> E-mail: yuki****@clear***** > >> > >> 株式会社クリアコード > >> 〒113-0033 東京都文京区本郷3-27-12 > >> 本郷デントビル2階 > >> TEL : 03-6231-7270 > >> FAX : 03-6231-7271 > >> WWW : http://www.clear-code.com/ > >> > >> _______________________________________________ > >> Groonga-commit mailing list > >> Groon****@lists***** > >> http://lists.sourceforge.jp/mailman/listinfo/groonga-commit > > > > > > -- > 結城 洋志 <YUKI Hiroshi> > E-mail: yuki****@clear***** > > 株式会社クリアコード > 〒113-0033 東京都文京区本郷3-27-12 > 本郷デントビル2階 > TEL : 03-6231-7270 > FAX : 03-6231-7271 > WWW : http://www.clear-code.com/ > > _______________________________________________ > Groonga-commit mailing list > Groon****@lists***** > http://lists.sourceforge.jp/mailman/listinfo/groonga-commit -- HAYASHI Kentaro <hayas****@clear*****>
