editLinux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:18:33 EDT 2007
Command line: ro root=LABEL=/ rhgb quiet console=ttyS1,57600 console=tty
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable)
BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved)
BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 850768) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
end_pfn_map = 2293760
DMI 2.4 present.
ACPI: RSDP 000F1CE0, 0024 (r2 DELL )
ACPI: XSDT 000F1D7C, 0084 (r1 DELL PE_SC3 1 DELL 1)
ACPI: FACP 000F1EBC, 00F4 (r3 DELL PE_SC3 1 DELL 1)
ACPI: DSDT CFB66000, 49A6 (r1 DELL PE_SC3 1 INTL 20050624)
ACPI: FACS CFB85C00, 0040
ACPI: APIC 000F1FB0, 0092 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SPCR 000F2067, 0050 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HPET 000F20B7, 0038 (r1 DELL PE_SC3 1 DELL 1)
ACPI: MCFG 000F20EF, 003C (r1 DELL PE_SC3 1 DELL 1)
ACPI: WD__ 000F212B, 0134 (r1 DELL PE_SC3 1 DELL 1)
ACPI: SLIC 000F225F, 0024 (r1 DELL PE_SC3 1 DELL 1)
ACPI: ERST CFB6AB28, 0210 (r1 DELL PE_SC3 1 DELL 1)
ACPI: HEST CFB6AD38, 027C (r1 DELL PE_SC3 1 DELL 1)
ACPI: BERT CFB6A9A8, 0030 (r1 DELL PE_SC3 1 DELL 1)
ACPI: EINJ CFB6A9D8, 0150 (r1 DELL PE_SC3 1 DELL 1)
ACPI: TCPA 000F23E1, 0064 (r1 DELL PE_SC3 1 DELL 1)
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 850768) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000230000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2293760
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0 -> 160
0: 256 -> 850768
0: 1048576 -> 2293760
On node 0 totalpages: 2095856
DMA zone: 56 pages used for memmap
DMA zone: 1321 pages reserved
DMA zone: 2623 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832392 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000cfb50000 - 00000000cfb66000
swsusp: Registered nosave memory region: 00000000cfb66000 - 00000000cfb85000
swsusp: Registered nosave memory region: 00000000cfb85000 - 00000000cfb86000
swsusp: Registered nosave memory region: 00000000cfb86000 - 00000000d0000000
swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fe000000
swsusp: Registered nosave memory region: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41688 bytes of per cpu data
Built 1 zonelists in Zone order. Total pages: 2063175
Policy zone: Normal
Kernel command line: ro root=LABEL=/ rhgb quiet console=ttyS1,57600 console=tty
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2327.501 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x80a4000 - 0xc0a4000
Memory: 8193576k/9175040k available (2441k kernel code, 189848k reserved, 1378k data, 324k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1
Calibrating delay using timer specific routine.. 4657.61 BogoMIPS (lpj=2328807)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 20781248
Detected 20.781 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x4
Initializing CPU#1
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327516)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327510)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 2/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x5
Initializing CPU#3
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327509)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 3/5 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x2
Initializing CPU#4
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327506)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 4/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x6
Initializing CPU#5
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327515)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 5/6 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU5: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x3
Initializing CPU#6
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327506)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 6/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 4655.02 BogoMIPS (lpj=2327512)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 7/7 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
Brought up 8 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2064 bytes
Time: 7:07:31 Date: 02/20/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 6
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
pnp: 00:08: ioport range 0x800-0x87f has been reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0x900-0x900 has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca9-0xcab has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: f2000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: e000-efff
MEM window: fc300000-fc4fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fc100000-fc2fffff
PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:04:00.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:06:00.0 to 64
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:05:01.0 to 64
PCI: Setting latency timer of device 0000:04:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 1048576 (order: 12, 25165824 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3242k freed
audit: initializing netlink socket (disabled)
audit(1203491250.963:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 2B02AABF702ECCF9
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:0e:0d.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:04:00.0 to 64
Allocate Port Service[0000:04:00.0:pcie10]
PCI: Setting latency timer of device 0000:05:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:00.0:pcie20]
PCI: Setting latency timer of device 0000:05:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:01.0:pcie20]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Magic number: 12:282:117
Freeing unused kernel memory: 324k freed
Write protecting the kernel read-only data: 1020k
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cc80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
SCSI subsystem initialized
megasas: 00.00.03.16 Mon Oct. 15 08:15:20 PDT 2007
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
megasas: FW now in Ready state
megasas: max_sectors : 0x280, cmd_per_lun : 0x80
scsi0 : LSI Logic SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access HITACHI HUS153014VLS300 A280 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access HITACHI HUS153014VLS300 A280 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access HITACHI HUS153014VLS300 A280 PQ: 0 ANSI: 5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
scsi 0:0:3:0: Direct-Access HITACHI HUS153014VLS300 A280 PQ: 0 ANSI: 5
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
scsi 0:0:32:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.11 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 570949632 512-byte hardware sectors (292326 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sd 0:2:0:0: [sda] 570949632 512-byte hardware sectors (292326 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
usb 1-5: new high speed USB device using ehci_hcd and address 4
ata1.00: ATAPI: HL-DT-STDVD-ROM GDR-T10N, 1.02, max UDMA/33
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-T10N 1.02 PQ: 0 ANSI: 5
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: Avocent Dell 03R874 as /class/input/input1
input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1
input: Avocent Dell 03R874 as /class/input/input2
input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1
usb 1-1.1: new full speed USB device using ehci_hcd and address 5
usb 1-1.1: configuration #1 chosen from 1 choice
input: Dell DRAC5 as /class/input/input3
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: Dell DRAC5 as /class/input/input4
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
usb 1-1.2: new high speed USB device using ehci_hcd and address 6
usb 1-1.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
usb-storage: device scan complete
scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1203491263.090:2): selinux=0 auid=4294967295
scsi 0:0:32:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 3:0:0:0: Attached scsi generic sg4 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr1
Floppy drive(s): fd0 is 1.44M
EDAC MC: Ver: 2.1.0 Oct 30 2007
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
FDC 0 is a post-1991 82077
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.5 (September 20, 2007)
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 001c23d8cfad
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001c23d8cfab
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:0e:0d.0[A] -> GSI 19 (level, low) -> IRQ 19
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
Adding 8385920k swap on /dev/sda2. Priority:-1 extents:1 across:8385920k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
net dev26646: device_rename: sysfs_create_symlink failed (-17)
net eth0: device_rename: sysfs_create_symlink failed (-17)
bnx2: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
net eth1: device_rename: sysfs_create_symlink failed (-17)
bnx2: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
audit(1203491279.854:3): audit_pid=4464 old=0 by auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ipmi message handler version 39.1
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
IPMI kcs interface initialized
ipmi device interface
eth0: no IPv6 routers present
Fusion MPT base driver 3.04.05
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.04.05
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
eth1: no IPv6 routers present
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc1 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc2 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc3 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc4 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc5 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc6 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc7 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc8 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc9 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc10 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc11 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc12 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc13 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc14 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc15 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc16 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc17 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc18 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc19 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc20 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc21 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc22 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc23 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc24 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc25 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc26 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc27 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc28 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc29 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc30 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc31 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc1 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc2 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc3 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc4 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc5 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc6 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc7 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc1 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc2 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc3 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc4 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc5 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc6 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc7 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc1 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc2 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc3 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc4 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc5 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc6 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc7 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc1 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc2 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc3 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc4 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc5 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc6 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc7 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc8 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc9 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc10 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc11 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc12 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc13 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc14 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc15 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc16 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc17 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc18 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc19 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc20 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc21 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc22 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc23 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc24 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc25 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc26 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc27 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc28 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc29 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc30 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc31 not found!
drivers/message/fusion/mptctl.c::mptctl_ioctl() @591 - ioc0 not found!
[PageInfo]
LastUpdate: 2008-04-10 19:04:06, ModifiedBy: nabeshin
[Permissions]
view:all, edit:login users, delete/config:doc editors