html/about/history.html

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
  "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
  <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
  <title>history</title>
  <meta http-equiv="Content-Style-Type" content="text/css">
  <link rel="stylesheet" href="../style.css" type="text/css">
</head>
<body>

<h1>History</h1>

<ul>
 <li><a href="#teraterm">Tera Term</a></li>
 <li><a href="#ttssh">TTSSH</a></li>
 <li><a href="#cygterm">CygTerm+</a></li>
 <li><a href="#cyglaunch">cyglaunch</a></li>
 <li><a href="#ttproxy">TTProxy</a></li>
 <li><a href="#ttmenu">TeraTerm Menu</a></li>
 <li><a href="#kanjimenu">TTX KanjiMenu</a></li>
 <li><a href="#alwaysontop">TTXAlwaysOnTop</a></li>
 <li><a href="#kcodechange">TTXKCodeChange</a></li>
 <li><a href="#resizemenu">TTXResizeMenu</a></li>
 <li><a href="#ttyrec">TTXttyrec</a></li>
 <li><a href="#viewmode">TTXViewMode</a></li>
 <li><a href="#recurringcommand">TTXRecurringCommand</a></li>
</ul>

<hr>

<h2 id="teraterm">Tera Term</h2>

<h3 id="teraterm_4.105">2019.xx.xx (Ver 4.105)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Added SFMT information on version dialog.</li>
      <li>Changed of indication from "Protocol" to "IP version" and from "UNSPEC" to "AUTO" on <a href="../menu/file-new.html">New connection dialog</a>.</li>
      <li>When the opacity value of the window is temporarily changed by operating the mouse wheel on the title bar of VT window, the tooltip of the opacity value is shown.</li>
      <li>The location of resizing toolchip is automatically moved to coordinates after resizing.</li>
      <li>Added slider for specify the opacity values on the Visual tab of the <a href="../menu/setup-additional.html">Additional settings dialog</a>. When transparency is not available, made opacity not changeable.</li>
      <li>Eterm look-feel: Added the <a href="../menu/setup-additional.html#MixedThemeFile">Mixed ThemeFile to Background</a> configuration. Also, added the the <a href="../setup/teraterm-ini.html#BGIgnoreThemeFile">BGIgnoreThemeFile</a> entry in the teraterm.ini file. The default value is off.</li>
      <li>When the opacity values of the <a href="../menu/setup-additional.html">Additional settings dialog</a> is input over than 255, the value is automatically changed to 255 over the dialog.</li>
      <li>Added support for REP control sequence.</li>

      <li>Serial port connection
        <ul>
          <li>Added support for hardware flow control DSR/DTR with serial connection.
            <ul>
              <li>The hardware is renamed to RTS/CTS, and DSR/DTR is newly added on the Flow control of <a href="../menu/setup-serialport.html">Serial port ([Setup] menu)</a>.</li>
              <li>MACRO: The DSR/DTR can be specified in <a href="../macro/command/setflowctrl.html">setflowctrl</a> command.</li>
            </ul></li>
          <li>The <a href="../menu/setup-serialport.html">[Setup]-[Serial port]</a> dialog can be called even while TCP/IP connection.</li>
          <li>The title of <a href="../menu/setup-serialport.html">[Setup]-[Serial port]</a> dialog is changed from "Serial port setup" to "Serial port setup and connection".</li>
          <li>The detail information of COM port is added on the <a href="../menu/setup-serialport.html#Information">[Setup]-[Serial port]</a> dialog.</li>
          <li>The tooltip of the speed setting is added on the <a href="../menu/setup-serialport.html#Information">[Setup]-[Serial port]</a> dialog.</li>
          <li>The OK button notation in the <a href="../menu/setup-serialport.html#OK">[Setup]-[Serial port]</a> dialog is changed refering to the connection state. </li>
          <li>The OK button can not be pressed in the <a href="../menu/setup-serialport.html#OK">[Setup]-[Serial port]</a> dialog when no COM ports are available.</li>
          <li>Added <a href="../commandline/teraterm.html#cdatabit">/CDATABIT=</a>,  <a href="../commandline/teraterm.html#cparity">/CPARITY=</a>, <a href="../commandline/teraterm.html#cstopbit">/CSTOPBIT=</a>, <a href="../commandline/teraterm.html#cflowctrl">/CFLOWCTRL=</a>, <a href="../commandline/teraterm.html#cdelayperchar">/CDELAYPERCHAR=</a>, <a href="../commandline/teraterm.html#cdelayperline">/CDELAYPERLINE=</a> command line options.</li>
        </ul>
      </li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The toolchip during resizing can not be displayed on the left and top edge of the desktop. This bug was introduced in 4.103.</li>
      <li>Eterm look-feel: When a image file is randomly selected with the wallpaper, invalid file may be selected. </li>
      <li>The help button of File-Log, File-Trasnfer, Setup-Font and Printer dialog does not work well. This bug was introduced in 4.104.</li>
      <li>Fixed a problem that TTIMESV (Save IME status) / TTIMERS (Restore IME status) control sequences do not work.</li>
      <li>The help button on the printer dialog may not be shown on some Windows version.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>Bug fix: A font(TSPECIAL1.TTF) copy may fail when Tera Term installs from the installer.</li>
      <li>NOTE: CygTerm+ is supported on Windows Vista or later. Please build CygTerm+'s source code by using Cygwin for older Windows, if CygTerm+ wants to run on older Windows.</li>
      <li>upgraded TTSSH to <a href="#ttssh_2.91">2.91</a>.</li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.26">1.0.0.26</a>.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.104">2019.08.31 (Ver 4.104)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The <a href="../setup/teraterm-win.html#textselect">Disabling text selection when the window is activated by mouse</a> configuration can be set up on the <a href="../menu/setup-additional.html#SelectOnActivate">Additional settings dialog</a>.</li>
      <li>The environment variable included in <a href="../menu/file-chdir.html">directory for file transfers</a> becomes to be expanded.</li>
      <li>Unspecified string font in IME uses your defined font.</li>
      <li>Added help button on Additional settings dialog.</li>
      <li>MACRO: The <a href="../macro/command/fileopen.html">fileopen</a> command does not cause an error when a file can not be opened. Reverted changes in 4.102.</li>
      <li>MACRO: When <a href="../macro/command/filetruncate.html">filetruncate</a> command does not cause an error when a file can not be opened, or file size can not be changed.</li>
    </ul>
  </li>
  <li>Bug fixes
    <ul>
      <li>When UTF-8 characters received, 4-byte UTF-8 characters are miss-decoded.</li>
      <li>When the Active Window Tracking is enabled, mouse cursor won't be active in Tera Term window. This bug was introduced in 4.103.</li>
      <li>The session number of window title is always 1. This bug was introduced in 4.103.</li>
      <li>When the font selection dialog is used while undetermined characters of IME are displayed , the font ot IME always is changed.</li>
      <li>When the locale setting is default(japanese) or invalid on English version of Windows, an application fault immediately occurs after starting Tera Term.</li>
      <li>A big file can not send by using [File]/[Send file..]. This bug was introduced in 4.103.</li>
      <li>Cancel printing dialog can not be shown. This bug was introduced in 4.103.</li>
      <li>The plugin compiled before 4.103 can not called because the DLL's calling convention is changed in Tera Term 4.103. </li>
      <li>MACRO: <a href="../macro/command/listbox.html">listbox</a> command can not adjust the width of list according to the window size. This bug was introduced in 4.103.</li>
      <li>MACRO: <a href="../macro/command/filecopy.html">filecopy</a> command may not store the result to result system variable.</li>
      <li>MACRO: <a href="../macro/command/filelock.html">filelock</a> and <a href="../macro/command/fileunlock.html">fileunlock</a> command always fail. This bug was introduced in 4.101.</li>
      <li>MACRO: When the first byte of the file is matched by using <a href="../macro/command/filestrseek2.html">filestrseek2</a> command, the file pointer is invalid. This bug was introduced in 4.101.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.90">2.90</a>.</li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.25">1.0.0.25</a>.</li>
      <li>upgraded Oniguruma to 6.9.3.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.103">2019.06.15 (Ver 4.103)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for <a href="../setup/teraterm-misc.html#HighDPI">High DPI</a> experimentally.
        <ul>
          <li>The default setting is disabled. When DPIAware=on is set in [Tera Term] of teraterm.ini file, this feature is enabled.</li>
          <li>However, this is only available for Windows 10 Version 1703 or later.</li>
        </ul></li>
      <li>The font submenu is newly added, and added support for configure the dialog font.
        <ul>
          <li>The default font is same as before.</li>
        </ul></li>
      <li>the pop-up menu of TEK Window is not displayed correctly.</li>
      <li>When the font file(TSPECIAL1.TTF) displaying ruled line is not installed, the file is loaded from same directory as ttermpro.exe.</li>
      <li>When the file sending by kermit protocol, notifies the file modification time instead of creation time.</li>
      <li>MACRO: Store <a href="../macro/command/exec.html">exec</a> command result to result variable.</li>
    </ul>
  </li>
  <li>Bug fixes
    <ul>
      <li>Display position of IME's conversion candidate window can not follow cursor position. This bug was introduced in 4.102.</li>
      <li>Can't display character such as U+2014 EM DASH, U+2212 MINUS SIGN, U+301C WAVE DASH etc. This bug was introduced in 4.102.</li>
      <li>MACRO: Fix handle leak when <a href="../macro/command/exec.html">exec</a> command is executed.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.89">2.89</a>.</li>
      <li>upgraded Oniguruma to 6.9.2.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.102">2019.02.28 (Ver 4.102)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The AlphaBlend VT window can be configured as a different value for each active and inative.</li>
      <li>The value of transparency can be temporarily changed by moving the mouse wheel on the title bar of the VT window.</li>
      <li>The internal implemention of the VT window was speeded up.</li>
      <li>UTF-8: Four bytes character can not be shown yet but can be decoded, the impact range of character corruption was be minimized.</li>
      <li>The language code(CodePage) of the "<a href="../menu/setup-terminal.html">Terminal ([Setup] menu)</a>" dialog(<a href="../usage/unicode.html">Unicode usage</a>).</li>
      <li>MACRO: The macro file can support UTF-8 and UTF-16(with BOM) encoding.</li>
      <li>MACRO: The <a href="../macro/command/getfileattr.html">getfileattr</a> command can be based on the current directory same as other command.</li>
      <li>MACRO: The <a href="../macro/command/fileopen.html">fileopen</a> command can cause an error when a file is not found with read only mode.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the AlphaBlend window is enabled, an application fault occurs on Windows 10.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.88">2.88</a>.</li>
      <li>upgraded Oniguruma to 6.9.1.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.101">2018.11.30 (Ver 4.101)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for following dtterm window manipulation sequences.
        <ul>
          <li>10: Full-screen mode</li>
          <li>13;2: Report window position. (text area)</li>
          <li>14;2: Report window size. (whole window)</li>
          <li>15: Report root window size in pixels.</li>
          <li>16: Report character size in pixels.</li>
        </ul></li>
      <li>The behavior of following dtterm window manipulation sequence was changed.
        <ul>
          <li>14: Report window size sequence: report text area size instead of whole window size.</li>
        </ul></li>
      <li>The left and right margin mode does not be reset when window size is changed.</li>
      <li>The `/' character can be treated as path separator by using the command line option receiving a file name.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The plugin compiled before 4.100 can not called because the DLL's calling convention is changed in Tera Term 4.100. </li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.87">2.87</a>.</li>
      <li>upgraded TTXResizeMenu Plug-in to <a href="#resizemenu_1.05">1.05</a></li>
      <li>upgraded Oniguruma to 6.9.0.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.100">2018.08.31 (Ver 4.100)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for multiple files' drag&amp;drop.</li>
      <li>Functional enhancement: <a href="../usage/mouse.html#dragdropwindow">Confirmation dialog by using drag&amp;drop a file</a>.</li>
      <li>Window size is maximized when the titlie bar is double-clicked if <a href="../menu/setup-terminal.html#TermIsWin">"Term size = win size"</a> setting is on.</li>
      <li>added the <a href="../setup/teraterm-win.html#title">Title format configuration</a> on the General tab of the <a href="../menu/setup-additional.html#TitleFormat">Additional settings dialog</a>.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.86">2.86</a>.</li>
      <li>upgraded TTXResizeMenu Plug-in to <a href="#resizemenu_1.04">1.04</a></li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.99">2018.05.31 (Ver 4.99)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the DECSACE control sequence.
        <ul>
          <li>default affected area of DECCARA and DECRARA control sequence is changed to stream.</li>
        </ul></li>
      <li>Improved the behavior of window resizing.</li>
      <li>Accept service name instead of the port number on the command line option.</li>
      <li>added the <a href="../commandline/teraterm.html#speed">/SPEED=</a> command line option which behavior is same as the <a href="../commandline/teraterm.html#baud">/BAUDE=</a> command line option.</li>
      <li>added the <a href="../macro/command/setspeed.html">setspeed</a> command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the mouse tracking is enabled, the menu can not be selected after clicking the screen.</li>
      <li>The target area of the DECCARA (Change Attributes in Rectangular Area) and DECRARA (Reverse Attributes in Rectangular Area) control sequence is invalid.</li>
      <li>The DECCARA control sequence breaks kanji character.</li>
      <li>The DECCARA control sequence breaks the color of cells.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.85">2.85</a>.</li>
      <li>upgraded Oniguruma to 6.8.2.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.98">2018.02.28 (Ver 4.98)</h3>
<ul class="history">
  <li>Bug fixes
    <ul>
      <li>The operability at screen edge is improved when mouse tracking is enabled.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.84">2.84</a>.</li>
      <li>upgraded Oniguruma to 6.7.1.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.97">2017.11.30 (Ver 4.97)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The response of DA2 request is changed.</li>
      <li>On telnet connection, the terminal speed is notified to the server.
        <ul>
          <li>added support for the Telnet Terminal Speed Option.</li>
          <li>added the <a href="../setup/teraterm-com.html#TerminalSpeed">TerminalSpeed</a> entry in the teraterm.ini file. The default is 38400.</li>
        </ul></li>
      <li>added configuration of timestamp type at the start of log file's line.
        <ul>
          <li>added "Elapsed Time (Logging)" and "Elapsed Time (Connection)" as timestamp type.</li>
          <li>The timestamp type can be changed on <a href="../menu/file-log.html#Timestamp">Log dialog</a> and <a href="../menu/setup-additional.html#LogTimestamp">Additional settings dialog</a>.</li>
          <li>The <a href="../setup/teraterm-misc.html#LogTimestampUTC">LogTimestampUTC</a> setting is obsolete, use the timestamp type setting instead.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The response of DECRQSS control sequence was invalid.</li>
      <li>On telnet connection, the terminal size is not notified correctly if terminal width or height is 255.</li>
      <li>When the [View Log] on the <a href="../menu/file.html">[File]</a> is called, the editor does not invoked.</li>
      <li>Fix the problem of the log option settings on the Log tab of <a href="../menu/setup-additional.html#LogOption">Additional settings dialog</a>
        <ul>
          <li>PlainText and Timestamp setting is not applied.</li>
          <li>Changes to the log option settings are applied when the dialog is cancelled.</li>
        </ul></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.83">2.83</a>.</li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.15">1.15</a></li>
      <li>upgraded Oniguruma to 6.6.1.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.96">2017.08.31 (Ver 4.96)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the configuring of the permitted ISO/IEC 2022 shift functions.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#ISO2022ShiftFunction">ISO2022ShiftFunction</a> entry in the teraterm.ini file. The default is on.</li>
        </ul></li>
      <li>added configuration of timestamp format at the start of log file's line.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#LogTimestampFormat">LogTimestampFormat</a> entry in the teraterm.ini file. The default is "%a %b %e %H:%M:%S.%N %Y".</li>
          <li>The default format is changed to RFC 3339 style. Specify the "%a %b %e %H:%M:%S.%N %Y" at the LogTimestampFormat entry to restore before format.</li>
        </ul></li>
      <li>UTC can be used at timestamp format at the start of log file's line.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#LogTimestampUTC">LogTimestampUTC</a> entry in the teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>Hidden font set by OS can be selected with font setting dialog.
        <ul>
          <li>The setting can be configured on the General tab of <a href="../menu/setup-additional.html#ListHiddenFonts">Additional settings dialog</a>.</li>
        </ul></li>
      <li>When the serial port and named pipe can not be opened, the error message contains reason or error code.</li>
      <li>When the <a href="../macro/command/sendlnbroadcast.html">sendlnbroadcast</a> macro command is used, the carriage return is sent one more time after last parameter.</li>
      <li>added the <a href="../macro/command/sendlnmulticast.html">sendlnmulticast</a> command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The response of DECLRMM status query by DECRQM was invalid.</li>
      <li><a href="../setup/teraterm-prn.html#formfeed">PrnConvFF</a> can not be loaded from TERATERM.INI file.</li>
      <li><a href="../macro/command/sendbroadcast.html">sendbroadcast</a> and <a href="../macro/command/sendlnbroadcast.html">sendlnbroadcast</a> macro command does not work.</li>
      <li><a href="../macro/command/sendbroadcast.html">sendbroadcast</a>, <a href="../macro/command/sendlnbroadcast.html">sendlnbroadcast</a> and <a href="../macro/command/sendmulticast.html">sendmulticast</a> macro command can't send the character of 0x00 or 0x01.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.82">2.82</a>.</li>
      <li>upgraded Oniguruma to 6.6.0.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.95">2017.05.31 (Ver 4.95)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added new feature regarding <a href="../setup/teraterm-win.html#maximize">How to scroll the screen when the window size is maximized</a>.
        <ul>
          <li>changed default action to the new method. If the action behaves in the same manner as Tera Term 4.94, please set MaximizedBugTweak to 1.</li>
          <li>changed MaximizedBugTweak value from on/off to 0/1/2 combination. The "off" is treated as 0, and the "on" is treated as 2.</li>
        </ul></li>
      <li>added the notification feature regarding clipboard accessing from the remote host. (Windows Me or 2000 or later)</li>
      <li>changed default directory path for receiving a file (Vista or later:Downloads, XP or earlier:My Documents).</li>
      <li>renamed command line from /NAMEDPIPE to <a href="../commandline/teraterm.html#pipe">/PIPE</a> option.</li>
      <li>When <a href="../commandline/teraterm.html#pipe">/PIPE</a> option is used as command line, the host name is complemented by these rules:
        <ul>
          <li>If the host name begins with a '\', the name is not changed.</li>
          <li>If the host name does not include a '\', the '\\.\pipe\' is added at the beginning.</li>
          <li>If the host name includes a '\' anywhere but first, before that is treated as server name and after that is treated as pipe name. </li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The port number cannot specify 65535 by the command line option.</li>
      <li>When the <a href="../menu/file-new.html">New connection</a> selects Serial menu, a part of TCP/IP menu is not disabled.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.81">2.81</a>.</li>
      <li>upgraded Oniguruma to 6.2.0.</li>
      <li>NOTICE: The installer no longer support Windows 95, 98, Me and NT 4.0. Please use the zip archive version on these Windows.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.94">2017.02.28 (Ver 4.94)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added `&amp;u' parameter to log file name that can convert the logon user name.</li>
      <li>added new line normalization on pasting. The default is off.
        <ul>
          <li>This feature can be enabled on Copy and Paste tab of <a href="../menu/setup-additional.html#NormalizeLineBreak">Additional settings dialog</a>.</li>
        </ul></li>
      <li>added the <a href="../macro/command/setflowctrl.html">setflowctrl</a> command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When Restore setup is called, the AlphaBlend can not be restored immediately.</li>
      <li>When Paste&lt;CR&gt; works, the end of data will be added invalid character.</li>
      <li>When Kanji(receive) is set to UTF-8, garbled characters will be shown after invalid byte characters are received.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.80">2.80</a></li>
      <li>upgraded TTXttyrec Plug-in to <a href="#ttyrec_1.03">1.03</a></li>
      <li>upgraded Oniguruma to 6.1.3.</li>
      <li>upgraded SFMT to 1.5.</li>
      <li>changed starting method of LogMeTT and TTLEditor installer.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.93">2016.11.30 (Ver 4.93)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added 48dot icon in the keycode.exe.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>After Kanji(receive) is set to EUC and UTF-8 string is shown, new Kanji(Chinese character) may be properly shown when Kanji(receive)  is set to UTF-8.</li>
      <li>When Kanji(receive) is set to UTF-8, ISO-2022-JP Kanji can not be properly shown with Japanese language setting.</li>
      <li>When <a href="../setup/teraterm-misc.html#DeferredLogWriteMode">DeferredLogWriteMode</a>=on is enabled and a log file is closed soon after opening the file, Tera Term rarely halts by dead-lock.</li>
      <li>When <a href="../menu/file-log.html">Log dialog</a> is closed, the memory leak of Tera Term core(ttermpro.exe) is happened.</li>
      <li>Windows 7 and Vista: When special operation is done on <a href="../menu/setup-general.html">General setup dialog</a>, an application fault occurs.</li>
      <li>When the real time mode is off by using broadcast command, invalid character will be added at the end of string.</li>
      <li>MACRO: When <a href="../macro/command/closesbox.html">closesbox</a> command is executed, the memory leak of Macro core(ttpmacro.exe) is happened.</li>
      <li>MACRO: The <a href="../macro/command/gethostname.html">gethostname</a>, <a href="../macro/command/gettitle.html">gettitle</a>, <a href="../macro/command/getmodemstatus.html">getmodemstatus</a>, <a href="../macro/command/loginfo.html">loginfo</a> and <a href="../macro/command/logopen.html">logopen</a> command will rarely be wrong.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.79">2.79</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_29">1.07_29</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.24">1.0.0.24</a></li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.14">1.14</a></li>
      <li>upgraded TTX KanjiMenu Plug-in to <a href="#kanjimenu_0.1.7">0.1.7</a></li>
      <li>upgraded TTXRecurringCommand Plug-in to <a href="#recurringcommand_1.05">1.05</a></li>
      <li>upgraded Oniguruma to 6.1.2.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.92">2016.08.31 (Ver 4.92)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added new feature which removes carriage return from end of line with pasting. The default value is off.
        <ul>
          <li>The function can be enabled at Copy and Paste tab of <a href="../menu/setup-additional.html#TrimTrailingNL">Additional settings dialog</a>.</li>
        </ul></li>
      <li>When scroll back is used, scroll state is always reseted with user input.</li>
      <li>ZMODEM: The default escaped character are added LF and GS by sending.</li>
      <li>The default value of <a href="../setup/teraterm-com.html#maxport">MaxComPort</a> setting is increased from 4 to 256.</li>
      <li>changed <a href="../macro/commandline.html">macro command line</a> behavior.
        <ul>
          <li>Strictly checked the syntax of command line option. When an unnecessary option is added at option back like as /Vxx, the option is not recognized.</li>
          <li>The option placement can be only specified before a filename. When the option is specified after the filename, the option is recognized as macro parameter.</li>
        </ul></li>
      <li>MACRO: The `params' string-typed array that is stored command line parameter(s).</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the clipboard is read from remote host, unnecessary NUL character is added at the end of the string.</li>
      <li>When the clipboard is written from remote host, empty string can not be set.</li>
      <li>When the clipboard is empty string and <a href="../usage/tips/vim.html#Bracketed">Bracketed Paste Mode</a> is enabled, final Bracket is only sent by pasting.</li>
      <li>ZMODEM: The escaped 0x7f and 0xff that is included in ZMODEM header packet can not be restored.</li>
      <li>Tera Term(ttermpro.exe) can not run on Windows 95/98/Me/NT4.0.</li>
      <li>MACRO: When invalid regular expression is specified at the <a href="../macro/command/strreplace.html">strreplace</a> command, source string is corrupted.
        <ul>
          <li>The result variable returns -1 when invalid regular expression is specified.</li>
        </ul></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.78">2.78</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.23">1.0.0.23</a></li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.91">2016.05.31 (Ver 4.91)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Tera Term waits for port connection when the serial port does not exist.
        <ul>
          <li>added the <a href="../commandline/teraterm.html#waitcom">/WAITCOM</a> command line option.</li>
          <li>added the <a href="../setup/teraterm-com.html#WaitCom">WaitCom</a> entry in the teraterm.ini file. The default value is off.</li>
        </ul></li>
      <li>added the LF entry in the <a href="../menu/setup-terminal.html#CRSend">New-line(transmit)</a>.</li>
      <li>When <a href="../setup/teraterm-trans.html#zmauto">ZmodemAuto=on</a> is enabled and ZRINIT packet is received, the file selection dialog of ZMODEM sending is opened.</li>
      <li>updated to new Tera Term icon file(teraterm.ico, vt.ico) and macro icon file(ttmacro.ico). Special thanks to Tatsu Sakamoto.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The background color erase(BCE) does not work with DECFI, DECBI control sequence.</li>
      <li>When <a href="../setup/teraterm-com.html#AutoComPortReconnect">AutoComPortReconnect</a>=on is enabled, Tera Term can not recognize a part of device regarding USB serial port connection and disconnection.</li>
      <li>When <a href="../menu/setup-additional.html#LogRotate">Log Rotate</a> is enabled and an existing file is logged, first file can not be rotated by specified size.</li>
      <li>MACRO: When <a href="../macro/command/ifthenelseif.html">if</a> has macro command without parameter, syntax error occurs.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.77">2.77</a></li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.90">2016.03.05 (Ver 4.90)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Changed XMODEM options
        <ul>
          <li>Error detection type(Checksum/CRC) can be specified at <del>sending</del> <ins>receiving</ins>.</li>
          <li>Packet size(1K) can be specified at <del>receiving</del> <ins>sending</ins>.</li>
          <li>The <a href="../macro/command/xmodemrecv.html">xmodemrecv</a> and <a href="../macro/command/xmodemsend.html">xmodemsend</a> macro argument is the same.</li>
        </ul></li>
      <li>Cancel from remote host at XMODEM transmitter becomes as trasnfer failure.</li>
      <li>When remote host sends 1K packet against Checksum at XMODEM receiving, Tera Term receives data as Checksum/1K.</li>
      <li>When remote host sends NAK at XMODEM CRC sending, Tera Term sends data as Checksum.</li>
      <li>added configuration for XMODEM, YMODEM and ZMODEM timeout value.
        <ul>
          <li>added the <a href="../setup/teraterm-trans.html#XmodemTimeouts">XmodemTimeouts</a> entry in the teraterm.ini file. </li>
          <li>added the <a href="../setup/teraterm-trans.html#YmodemTimeouts">YmodemTimeouts</a> entry in the teraterm.ini file. </li>
          <li>added the <a href="../setup/teraterm-trans.html#ZmodemTimeouts">ZmodemTimeouts</a> entry in the teraterm.ini file. </li>
        </ul></li>
      <li>XMODEM: Send and Receive dialog's option can not be affected each other.</li>
      <li>MACRO: When <a href="../macro/command/ifthenelseif.html">if</a> does not have statement, macro error always occurs.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>BCE information does not be updated at OSC 4/11/104/111 control string.</li>
      <li>XMODEM: When CRC sends, Checksum may send half way incorrectly.</li>
      <li>Eterm look-feel: When invalid image file is specified as background, an application fault occurs.</li>
      <li>The return value of <a href="../macro/command/random.html">random</a> macro command is the deviation of the pseudo random number.
        <ul>
          <li>The specified maximum value will be a very low probability.</li>
          <li>When the maximum value is specified as over 32768 number, any value can not be generated.</li>
          <li>Random generation is used for SFMT.</li>
        </ul></li>
      <li>When invalid folder type is specified on the <a href="../macro/command/getspecialfolder.html">getspecialfolder</a> macro command, the desktop folder is returned by mistake. </li>
      <li>MACRO: When <a href="../macro/command/getipv6addr.html">getipv6addr</a> command is called on Windows 2000, an application _ttpmacro.exe_ fault occurs.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.76">2.76</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_28">1.07_28</a></li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.89">2015.12.01 (Ver 4.89)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The parameter check of the control sequence can be reinforced.</li>
      <li>added support for querying the status of DECSLRM and DECSCUSR by using the DECRQSS control sequence.</li>
      <li>When the baud rate is high speed on the serial connection, the file transfer can be accelerated.
        <ul>
          <li>added the <a href="../setup/teraterm-trans.html#FileSendHighSpeedMode">FileSendHighSpeedMode</a> entry in the teraterm.ini file. The default value is on.</li>
        </ul></li>
      <li>Eterm look-feel: added the <a href="../menu/setup-additional.html#ImageBrightness">Image Brightness</a> configuration.</li>
      <li>added the Virtual Store path to <a href="../menu/setup-directory.html">Setup directory</a>.</li>
      <li>The cygterm.cfg is not saved on dialog closing but is saved on the Save setup when <a href="../menu/setup-additional.html#CygTerm">the CygTerm configuration of the Addtional settings</a> is used.</li>
      <li>The command line option can be quoted from an offset when the '"' is used.</li>
      <li>When the click-able URL is not double-clicked but single-clicked on the version dialog, the browser can be launched.</li>
      <li>MACRO: added new parameter which can specify an index of selected item at the <a href="../macro/command/listbox.html">listbox</a> macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the host name includes a comment on new connection dialog, it will not connect to the remote host.</li>
      <li>When the USB serial cable is inserted and extracted while the serial connection is doing, new serial connection will be failed. However, this fix is supported on the Windows XP or later.
        <ul>
          <li>added the <a href="../setup/teraterm-com.html#AutoComPortReconnect">AutoComPortReconnect</a> entry in the teraterm.ini file. The default value is on.</li>
        </ul></li>
      <li>The cygterm.cfg file can not be saved in the Virtual Store environment.</li>
      <li>The status line can not work well.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.75">2.75</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.22">1.0.0.22</a></li>
      <li>upgraded TTXRecurringCommand Plug-in to <a href="#recurringcommand_1.04">1.04</a></li>
      <li>upgraded LogMeTT to 2.12</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.88">2015.09.01 (Ver 4.88)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>When the color palette is changed and inquired with the OSC 4, the palette number(256, 258, 259) is treated as the highlight, blinking and reverse attribute color.</li>
      <li>When the color is inquired with the OSC 4, OSC 10 and so on, the terminal character is matched to the requested character.</li>
      <li>The all attribute color is reset to the initial status with the OSC 105 ST.</li>
      <li>added the button to open a configuration file to <a href="../menu/setup-directory.html">Setup directory</a>.</li>
      <li>MACRO: A dialog of the filenamebox and dirnamebox is on top of all the other windows.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the port number is not 23 on local connection, the Cygwin connection starts by Alt+D(Duplicate session) key.</li>
      <li>When the <a href="../menu/setup-keyboard.html#MetaKey">Meta key</a> is set to left or right, the combination key with the Alt and the cursor/Insert/etc edit keypad can not work well in the KEYBOARD.CNF.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.74">2.74</a></li>
      <li>added support for Microsoft Windows 10.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.87">2015.05.31 (Ver 4.87)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added the <a href="../menu/setup-directory.html">[Setup directory]</a> under the <a href="../menu/setup.html">[Setup]</a> menu.</li>
      <li>MACRO: A macro file described in UTF-8 BOM can not report a syntax error.</li>
      <li>MACRO: A numerical value can be specified at the <a href="../macro/command/filewrite.html">filewrite</a>, <a href="../macro/command/filewriteln.html">filewriteln</a> macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The keyboard(CNF) configuration will be reset when a new connection is created.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.73">2.73</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.21">1.0.0.21</a></li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.13">1.13</a></li>
      <li>upgraded LogMeTT to 2.10.3</li>
      <li>changed the domain name from SourceForge.jp to OSDN.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.86">2015.02.28 (Ver 4.86)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>When the [Reset Terminal] on the <a href="../menu/control.html">[Control]</a> is called, the color setup with OSC 10/11 will be reseted.</li>
      <li>YMODEM: The block0 packet size meaning end of transfer is 128 byte at all time. Special thanks to mlukoshkov.</li>
      <li>YMODEM: The packet of file information is not fixed size but variable size(128 or 1024byte).</li>
      <li>added the <a href="../macro/command/dirnamebox.html">dirnamebox</a> command.</li>
      <li>added the <a href="../macro/command/getmodemstatus.html">getmodemstatus</a> command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the DECBI control sequence is used on the left of the screen, the wide character of the left screen will be incorrectly removed.</li>
      <li>The KEYBOARD.CNF file can not be loaded when the Tera Term is performed with the macro script.</li>
      <li>YMODEM: When the data is sent, the CANCEL command from the remote host does not work well.</li>
      <li>YMODEM: When the received file information contains only a file name, an end of the file name is broken.</li>
      <li>YMODEM: When the received file information does not include the file size, the file data can not be recorded well.</li>
      <li>The setting value of the <a href="../menu/setup-additional.html#LogRotate">Log Rotate</a> will not display well.</li>
      <li>When the x=0,y=0 is specified by the <a href="../macro/command/setdlgpos.html">setdlgpos</a> macro command, the <a href="../macro/command/statusbox.html">statusbox</a> will be newly opened and however the statusbox can not be properly shown.</li>
      <li>When the macro filename is so longer, the currently executing line number can not be shown. And also, the macro window can be re-sizable.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.72">2.72</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_25">1.07_25</a></li>
      <li>upgraded Oniguruma to 5.9.6.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.85">2014.11.30 (Ver 4.85)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the pause time while the break signal is sending to the serial port.
        <ul>
          <li>added the <a href="../setup/teraterm-com.html#SendBreakTime">SendBreakTime</a> entry in the teraterm.ini file.</li>
        </ul></li>
      <li>The Alt+D and Alt+I accelerator key can only be worked on the VT window.</li>
      <li>added new optional setting that can disable accelerator key of New Connection.
        <ul>
          <li>added <a href="../setup/teraterm-misc.html#AcceleratorNewConnection">AcceleratorNewConnection</a> entry to teraterm.ini.</li>
        </ul></li>
      <li>added new optional setting that can disable accelerator key of Cygwin connection.
        <ul>
          <li>added <a href="../setup/teraterm-misc.html#AcceleratorCygwinConnection">AcceleratorCygwinConnection</a> entry to teraterm.ini.</li>
        </ul></li>
      <li>added the 3rd argument to specify the initial directory at the <a href="../macro/command/filenamebox.html">filenamebox</a> macro command.</li>
      <li>added the 4th argument to open a text file for reading at the <a href="../macro/command/fileopen.html">fileopen</a> macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The language file will not be shown in the General setup.</li>
      <li>When the <a href="../macro/command/connect.html">connect</a> macro command is failed, the command will be failed again.</li>
      <li>The floating point number can not be specified in the <a href="../macro/command/sprintf.html">sprintf</a>, <a href="../macro/command/sprintf2.html">sprintf2</a> macro command.</li>
      <li>The character width and precision specifying of the format style can not use the * character in the <a href="../macro/command/sprintf.html">sprintf</a>, <a href="../macro/command/sprintf2.html">sprintf2</a> macro command.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.71">2.71</a></li>
      <li>added the Traditional Chinese.lng language file. Special thanks to Wei Yan.</li>
      <li>added support for 64bit Cygwin connection automatically.</li>
      <li>removed the 64bit cyglaunch.exe program.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.84">2014.08.31 (Ver 4.84)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>When a file is received by using YMODEM or ZMODEM protocol, the file time-stamp is updated.</li>
      <li>added the log type configuration on the Log tab of the <a href="../menu/setup-additional.html#LogOption">Additional settings dialog</a>.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the LanguageUI is changed on the General setup dialog, the help file can not be switched.</li>
      <li>MACRO: The last line number can not display on the macro execution dialog.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>added support for Microsoft Windows Server 2012 R2.</li>
      <li>upgraded TTSSH to <a href="#ttssh_2.70">2.70</a></li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.12">1.12</a></li>
      <li>upgraded TTXResizeMenu Plug-in to <a href="#resizemenu_1.03">1.03</a></li>
      <li>upgraded LogMeTT to 2.10.2</li>
      <li>added the 64bit cygterm.exe and cyglaunch.exe into the installation directory.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.83">2014.06.01 (Ver 4.83)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The cursor position can be moved to the top-left of the screen when the screen is clear.
        <ul>
          <li>added support for the TTCTH control sequence.</li>
        </ul></li>
      <li>added support for Termcap/Terminfo string query.
        <ul>
          <li>Refer to the <a href="../usage/tips/vim.html#background">Background color</a> for the vim user.</li>
        </ul></li>
      <li>Eterm look-feel: Changed the background image from label to check-box style on the Visual tab of the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
      <li>added support for selecting any type of the <a href="../setup/teraterm-term.html#displayall">Debug mode</a>.
        <ul>
          <li>added the DebugModes entry in the teraterm.ini file.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The background color will not be painted well after the cursor position is restored.</li>
      <li>Eterm look-feel: The background image file will not be drawn by using any JPEG file.</li>
      <li>Fixed some bugs regarding Debug mode
        <ul>
          <li>When the debug mode is entered, the insertion mode and the auto-wrap mode may be changed.</li>
          <li>When the debug mode is entered, the character attribute can not be reseted.</li>
          <li>When the debug mode is leaved, the character attribute may be reseted.</li>
        </ul></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.69">2.69</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.20">1.0.0.20</a></li>
      <li>upgraded LogMeTT to 2.10.1.7</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.82">2014.03.08 (Ver 4.82)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>A multicast name by using the <a href="../macro/command/sendmulticast.html">sendmulticast</a> macro command can be specified with the <a href="../commandline/teraterm.html#mn">/MN</a> command line option.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>A cursor can not be moved to right edge by using the CHA, HPA control sequence.</li>
      <li>MACRO: By using the `<a href="../macro/command/include.html">include</a>' macro command, an application fault occurs while running ttpmacro.exe.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.81">2014.02.28 (Ver 4.81) Celebrating 20 years</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Macro
        <ul>
          <li>added the <a href="../macro/command/uptime.html">uptime</a> command.</li>
          <li>The value by using <a href="../macro/command/logautoclosemode.html">logautoclosemode</a> is set to default when the macro script is terminated.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the window size is changed, the cursor moves to the left margin.</li>
      <li>The "Include screen buffer" option appears in the "Send file" and "ZMODEM Send" dialog.</li>
      <li>When the LanguageUI is changed on the General setup dialog, the window title can not be updated.</li>
      <li>MACRO: A macro file larger than 1MB slows down the performance.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.68">2.68</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.19">1.0.0.19</a></li>
      <li>upgraded LogMeTT to 2.10.1</li>
      <li>upgraded TTLEditor to 1.5</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.80">2013.11.30 (Ver 4.80)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>can be changed the maximum size of the OSC string
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#MaxOSCBufferSize">MaxOSCBufferSize</a> entry in the teraterm.ini file. The default value is 4096.</li>
        </ul></li>
      <li>added the "Include screen buffer" option in the <a href="../menu/file-log.html#LogIncludeScreenBuffer">Log dialog box</a>.
        <ul>
          <li>added the LogIncludeScreenBuffer entry in the <a href="../setup/teraterm-ini.html#LogIncludeScreenBuffer">teraterm.ini</a> file.</li>
          <li>added the "Include screen buffer" option at the "<a href="../macro/command/logopen.html">logopen</a>" macro command.</li>
        </ul></li>
      <li>added the <a href="../commandline/teraterm.html#es">/ES</a> command line option. It enables the "New connection" dialog.</li>
      <li>When the URL string is divided at the end of the line, new setting can enable to concatenate the whole string.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#JoinSplitURL">JoinSplitURL and JoinSplitURLIgnoreEOLChar</a> entries in the teraterm.ini file.</li>
        </ul></li>
      <li>Macro
        <ul>
          <li>added the TTL filename on the error and execution dialog.</li>
          <li>Saves and restores the timezone when the <a href="../macro/command/gettime.html">gettime</a> and <a href="../macro/command/getdate.html">getdate</a> command executes.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the terminal size is changed, the left and right margin mode (DECLRMM) does not cleared.</li>
      <li>The VPR/VPB/HPR/HPB control sequences are affected by the scroll margin.</li>
      <li>A cursor will be moved to upper screen over by using the CUU/VPB control sequences.</li>
      <li>The VPB control sequence will be released with a part of mode.</li>
      <li>The DECFI/DECBI control sequence ignores the scroll margin.</li>
      <li>The DECBI control sequence mistakes for saving the cursor position.</li>
      <li>The DECFI control sequence mistakes for changing the application keypad mode.</li>
      <li>When the log file is opened, the "Hide dialog" function does not work well.</li>
      <li>When the tool chip is minus position on resizing, the tool chip is shown on the primary monitor with the multi monitor environment.</li>
      <li>Tera Term(ttermpro.exe) can not run on Windows 95/NT4.0.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.67">2.67</a></li>
      <li>upgraded TTXRecurringCommand Plug-in to <a href="#recurringcommand_1.03">1.03</a></li>
      <li>added support for Microsoft Windows 8.1.</li>
      <li>upgraded Oniguruma to 5.9.5.</li>
      <li>added the Simplified Chinese.lng language file. Special thanks to LiShaohui.</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.79">2013.09.01 (Ver 4.79)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the DECRQM(Request Mode) control sequence.</li>
      <li>added support for left and right margin.
        <ul>
          <li>added support for DECLRMM(Left Right Margin Mode), DECSLRM(Set Left and Right Margins) control sequences.</li>
        </ul></li>
      <li>When the <a href="../menu/file.html">Exit All</a> is called, the user is always confirmed.</li>
      <li>added the Undo menu under the <a href="../menu/window.html">Window menu</a> when Tera Term's windows are arranged.</li>
      <li>The file transferring dialog can not be shown.
        <ul>
          <li>added the <a href="../setup/teraterm-trans.html#hidetransdialog">FTHideDialog</a> entry in the teraterm.ini file. The default value is off. Special thanks to Teodor Robas.</li>
        </ul></li>
      <li>The beep sound can be suppressed when the bell ringing is rushed.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#BellLimitting">BellOverUsedTime, BellOverUsedCount and BellSuppressTime</a> entries in the teraterm.ini file. The default value are 2 , 5 and 5.</li>
        </ul></li>
      <li>added the <a href="../commandline/teraterm.html#autowinclose">/AUTOWINCLOSE</a> command line option to control the <a href="../menu/setup-tcpip.html#AutoWinClose">Auto window close</a>.</li>
      <li>Macro
        <ul>
          <li>added the "Unknown command." new message in the <a href="../macro/appendixes/errormessages.html">Error messages</a>.</li>
          <li>added the <a href="../macro/command/logautoclosemode.html">logautoclosemode</a> command.</li>
          <li>added the detail information(line number and error token) on the error dialog.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the UseNomalBGColor is on, the OSC 111(Resetting standard background color) control string after the OSC 11(Setting standard background color) can not reset the background color of characters including bold attribute and so on.</li>
      <li>The sequence reporting the cursor change can not recognize the upper margin when the origin mode is enabled.</li>
      <li>Both the Intermediate Byte and Private Parameter control sequence can not be ignored.</li>
      <li>When the <a href="../setup/teraterm-win.html#textselect">SelectOnActivate</a> is off, the button released event is incorrectly sent by clicking the in-active window.</li>
      <li>When second Tera Term is launched, the keyboard configuration file can not be read.</li>
      <li>When the file is sent by D&amp;D, the help button of the dialog can not be worked well.</li>
      <li>MACRO <a href="../macro/command/exec.html">exec</a>: The show parameter will be ignored when the wait parameter is 1(4.63 later) or the parameter is not 1(4.78 later).</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.66">2.66</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_24">1.07_24</a></li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.78">2013.05.31 (Ver 4.78)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Select "Selection" by default in the printer dialog when there is a selection. Special thanks to tentner.</li>
      <li>added the <a href="../menu/setup-additional.html#LogRotate">Log Rotate</a> configuration on the Additional settings dialog.
        <ul>
          <li>added the LogRotate, LogRotateSize, LogRotateSizeType and LogRotateStep entries in the teraterm.ini file.</li>
        </ul></li>
      <li>added the Exit All under the <a href="../menu/file.html">File menu</a>.</li>
      <li>added the Cascade, Stacked and Side By Side under the <a href="../menu/window.html">Window menu</a>.</li>
      <li>added the <a href="../commandline/teraterm.html#nolog">/nolog</a> command line option to disable the <a href="../menu/setup-additional.html#LogAutoStart">Auto start logging</a>.</li>
      <li>Macro
        <ul>
          <li>added the <a href="../macro/command/listbox.html">listbox</a> command.</li>
          <li>added the <a href="../macro/command/getipv4addr.html">getipv4addr</a> command.</li>
          <li>added the <a href="../macro/command/getipv6addr.html">getipv6addr</a> command.</li>
          <li>added the <a href="../macro/command/logrotate.html">logrotate</a> command.</li>
          <li>added the <a href="../macro/command/crc16.html">crc16</a>, <a href="../macro/command/crc16.html">crc16file</a> command.</li>
          <li>added the <a href="../macro/command/checksum8.html">checksum8</a>, <a href="../macro/command/checksum8.html">checksum8file</a> command.</li>
          <li>added the <a href="../macro/command/checksum16.html">checksum16</a>, <a href="../macro/command/checksum16.html">checksum16file</a> command.</li>
          <li>added the <a href="../macro/command/checksum32.html">checksum32</a>, <a href="../macro/command/checksum32.html">checksum32file</a> command.</li>
          <li>added the <a href="../macro/command/bringupbox.html">bringupbox</a> command.</li>
          <li>added the <a href="../macro/command/regexoption.html">regexoption</a> command.</li>
          <li>added the 4th argument(current directory) at the <a href="../macro/command/exec.html">exec</a> command.</li>
          <li>The '<a href="../macro/command/show.html">show</a> 1' command brings the macro window to the top.</li>
          <li>The <a href="../macro/command/messagebox.html">messagebox</a>, <a href="../macro/command/inputbox.html">inputbox</a> and <a href="../macro/command/listbox.html">listbox</a> commands bring the macro dialog to the top.</li>
          <li>The <a href="../macro/command/wait.html">wait</a>, <a href="../macro/command/waitln.html">waitln</a> and <a href="../macro/command/waitregex.html">waitregex</a> commands can wait an empty strings.</li>
          <li>When the <a href="../macro/command/waitregex.html">waitregex</a> command matches some parameters at the same time, the first matched parameter is selected.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>Can not create a file including the IPv6 address in the &amp;h of the log file.</li>
      <li>When the <a href="../setup/teraterm-misc.html#LogLockExclusive">LogLockExclusive</a> is off, the exclusive lock remains in the log file..</li>
      <li>When a log file is retrieving on the network path, Tera Term does not go slow.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#DeferredLogWriteMode">DeferredLogWriteMode</a> entry in the teraterm.ini file. The default value is ON.</li>
        </ul></li>
      <li>When the URL string ends at the right row and return code, the URL string continues to next line by mistake.</li>
      <li>The URL string on the mouse hand cursor shifts to the left with half character by mistake.</li>
      <li>MACRO: The send/sendln command can be affected by the <a href="../menu/setup-additional.html#PasteDelayPerLine">Paste delay per line</a> configuration.</li>
      <li>MACRO: When the timeout is 0, the <a href="../macro/command/waitn.html">waitn</a> command can not wait any character.</li>
      <li>MACRO: When the break command is executed after the continue command, the Invalid Control error will be occurred.</li>
      <li>MACRO: The box-style macro command can not show the dialog position well on the multi display.</li>
      <li>MACRO: The <a href="../macro/command/wait.html">wait</a> and <a href="../macro/command/waitln.html">waitln</a> command can not detect the right string.(ex. wait "aab" does not work against "aaab")</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>added the Russian.lng language file. Special thanks to Sergey Ryumik.</li>
      <li>added the Korean.lng language file. Special thanks to Daehong Kim.</li>
      <li>upgraded TTSSH to <a href="#ttssh_2.65">2.65</a></li>
      <li>upgraded Oniguruma to 5.9.4</li>
      <li>added support for Microsoft Windows Server 2012.</li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.77">2013.02.28 (Ver 4.77)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the DECFRA (Fill Rectangular Area) control sequence.</li>
      <li>added support for the window-ops control sequence to push/pop window title on stack.</li>
      <li>Macro
        <ul>
          <li>added the <a href="../macro/command/continue.html">continue</a> command.</li>
          <li>Changed the maximum length of the string variable to 511 bytes.</li>
        </ul></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.64">2.64</a></li>
      <li>upgraded TTXResizeMenu Plug-in to <a href="#resizemenu_1.02">1.02</a></li>
      <li>upgraded TTXKCodeChange Plug-in to <a href="#kcodechange_1.01">1.01</a></li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.76">2012.12.02 (Ver 4.76)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the <a href="ctrlseq.html#charattr">SGR 38:2, 48:2</a>(the character and background color changing specified by RGB value). The nearest color with 256 color palette is used.</li>
      <li>added support the colon(:) separator with the <a href="ctrlseq.html#charattr">SGR 38:5, 48:5</a>(the character and background color changing specified by RGB value). Refer to the ISO/IEC 8613-6 (ITU-T Rec. T.416).</li>
      <li>The method of the special folder is changed from reading the registry to SH API.</li>
      <li>Do not save the <a href="../setup/teraterm-win.html#WindowIcon">VTIcon and TEKIcon entries</a> into the teraterm.ini file.</li>
      <li>When a ini file can not be written at the Save setup, the error message will be shown.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The palette out of range number can not be ignored with the <a href="ctrlseq.html#charattr">SGR 38:5, 48:5</a>(the character and background color changing specified by RGB value).</li>
      <li>A string pasted by clipboard will be corrupted with any keyboard layout.</li>
      <li>The <a href="../macro/command/strreplace.html">strreplace</a> macro command will be crashed when the 'matchstr', 'groupmatchstr1' - 'groupmatchstr9' system variables are specified as the argument.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.63">2.63</a></li>
      <li>added support for Microsoft Windows 8.</li>
      <li>upgraded Oniguruma to 5.9.3</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.75">2012.08.31 (Ver 4.75)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>A button value is changed from 3 to 35 while the button is not pressed at the Any Event Tracking mode.</li>
      <li>added the 0; character at the reply head by requesting the character attribute of the DECRQSS.</li>
      <li>At requesting the character attribute of the DECRQSS, the color attribute is not included in reply when the <a href="../menu/setup-additional.html">Enable ANSI Color</a> is off.</li>
      <li>When the host number is discontinuous value, Tera Term can read the [Hosts] section in the teraterm.ini file.</li>
      <li>Macro
        <ul>
          <li>added the <a href="../macro/command/setpassword.html">setpassword</a> command.</li>
          <li>added the <a href="../macro/command/ispassword.html">ispassword</a> command.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>Named pipe: The pipe can not be disconnected when the Oracle Virtual Box is terminated.</li>
      <li>COM port: The default setting can not be saved in the teraterm.ini file.</li>
      <li>YMODEM: When the receiving a file is temporarily stopped, Tera Term can not send a NAK after timeout. So, the transferring can not be continued.</li>
      <li>Macro command: The send and sendln can not transmit a character #01.</li>
      <li>Macro command regarding file using: A relative path will not be recognized.
        <ul>
          <li>The base of a relative path will be a path existing a macro file or Tera Term installation directory. By using this bug fix, the relative path can be a path existing a macro file.</li>
        </ul></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.62">2.62</a></li>
    </ul>
  </li>
</ul>


<h3 id="teraterm_4.74">2012.05.31 (Ver 4.74)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>Serial port connection
        <ul>
          <li>added the mark parity, space parity and 1.5 stop bit on the serial port setup.</li>
          <li>added the "mark" and "space" name of the Parity entry. The default is "none".</li>
          <li>added the "1.5" name of the StopBit entry. The default is "1".</li>
        </ul></li>
      <li>Named pipe
        <ul>
          <li>added support for the named pipe. Tera Term can <a href="../usage/tips/namedpipe.html">connect the serial port of the VMware and Hyper-V</a>.</li>
          <li>A named pipe can be specified into the TCP/IP:Host entry of <a href="../menu/file-new.html">New connection dialog</a>.</li>
          <li>added the <a href="../commandline/teraterm.html#namedpipe">/NAMEDPIPE</a> option by specifying the named pipe.</li>
        </ul></li>
      <li>added the AUTO entry in the <a href="../menu/setup-terminal.html#CRReceive">New-line(receive)</a>. Special thanks to tentner.</li>
      <li>added the selection of the font quality.
        <ul>
          <li>added the Font quality configuration on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
        </ul></li>
      <li>added the SCP destination path on the confirmation dialog when a user drags a file to TeraTerm window.
        <ul>
          <li>added the ScpSendDir entry in the teraterm.ini file.</li>
        </ul></li>
      <li>Eterm look-feel
        <ul>
          <li>Environment variable strings(%variableName%) can be included in the ini file path.</li>
          <li>added an image file specified configuration(theme\ImageFile.INI). Also, a background image file can be specified on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
          <li>Enabled the "Eterm lookfeel" check-box on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
        </ul></li>
      <li>added the LanguageUI entry on the <a href="../menu/setup-general.html">General setup dialog</a>.</li>
      <li>A message dialog is shown when the cygterm.cfg has been saved on the Cygwin tab of the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
      <li>added support for IME feedback back and forth function. The ATOK2012, MS-IME2002 and MS-IME2003 work well. Also, this feature is disabled with "IME=off"(teraterm.ini).</li>
      <li>Removed an extra semicolon(;) included in the window size requesting.</li>
      <li>Macro
        <ul>
          <li>added the "paramcnt"(argument count) and "param1"(macro filename) in the <a href="../macro/syntax/variables.html">Variables</a>.</li>
          <li>added a sample code in the <a href="../macro/command/connect.html">connect</a> command.</li>
          <li>added the <a href="../macro/command/filelock.html">filelock</a> command.</li>
          <li>added the <a href="../macro/command/fileunlock.html">fileunlock</a> command.</li>
          <li>added the third argument _timezone_ at the <a href="../macro/command/gettime.html">gettime</a> and <a href="../macro/command/getdate.html">getdate</a> command.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>KERMIT protocol
        <ul>
          <li>The initial parameters of the KERMIT server do not be checked well.</li>
        </ul></li>
      <li>The drop down list's items are not shown on Windows 2000 or earlier.</li>
      <li>Fixed a typo of the Cyrillic letter translation table(range of CP866 and ISO8859-5).</li>
      <li>A string array can not be recognized as the argument of the macro command.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.61">2.61</a></li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.73">2012.02.29 (Ver 4.73)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for following control strings.
        <ul>
          <li>OSC 5 (Change bold/blink/reverse attribute color)</li>
          <li>OSC 104 (Reset color palette)</li>
          <li>OSC 105 (Reset bold/blink/reverse attribute color)</li>
          <li>OSC 110 (Reset VT window text foreground color)</li>
          <li>OSC 111 (Reset VT window text foreground color)</li>
          <li>OSC 115 (Reset TEK window text foreground color)</li>
          <li>OSC 116 (Reset TEK window text foreground color)</li>
        </ul></li>
      <li>added support for reading the Clipboard by using the OSC 52(clipboard accessing) control sequence.</li>
      <li>added support for xterm(UTF-8), xterm(SGR) and rxvt-unicode style extended mouse tracking mode.</li>
      <li>When the receiving file is empty, the file name is assigned to no-name.</li>
      <li>When the receiving file name contains banned characters, these characters are replaced to _.</li>
      <li>KERMIT protocol
        <ul>
          <li>Changed the MAXL from 90 to 94. Workaround for failing to communicate against NT-4S(Hitachi VoIP gateway).</li>
          <li>Improved the KERMIT.LOG more easily.</li>
          <li>added the <a href="../setup/teraterm-trans.html#kmlongpkt">KmtLongPacket</a> entry in the teraterm.ini file. The default value is off.
          <li>added the <a href="../setup/teraterm-trans.html#kmfileattr">KmtFileAttr</a> entry in the teraterm.ini file. The default value is off.
        </ul></li>
      <li>added support for exclusive-locking the log file in written mode.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#LogLockExclusive">LogLockExclusive</a> entry in the teraterm.ini file. The default value is on.
        </ul></li>
      <li>added the "<a href="../macro/command/loginfo.html">loginfo</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>Updated the Cyrillic letter translation table(range of KOI8-R, CP866, Windows-1251 and ISO8859-5).</li>
      <li>The packet number will not be correct while sending a file by using the XMODEM and YMODEM protocol.</li>
      <li>When a log is started, the log window is temporarily activated. However, this is enabled for Windows 2000 later.</li>
      <li>"<a href="../macro/command/filerename.html">filerename</a>" macro command: When a file can not be renamed, the error code stores to the result variable.</li>
      <li>"<a href="../macro/command/filedelete.html">filedelete</a>" macro command: When a file can not be removed, the error code stores to the result variable.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH to <a href="#ttssh_2.60">2.60</a></li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.72">2011.12.04 (Ver 4.72)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for OSC 10 (Change VT window text foreground color), 11 (Change VT window text background color), 15 (Change TEK window text foreground color) and 16 (Change TEK window text background color) control string.</li>
      <li>added support for OSC 52 (Clipboard access) control string.
        <ul>
          <li>added the Clipboard access from remote entry on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
        </ul></li>
      <li>added support for configuring the control sequence to change permitted tab-stops.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#TabStopModify">TabStopModifySequence</a> entry in the teraterm.ini file. The default is on.</li>
        </ul></li>
      <li>Broadcast Command: When a user uses the real time mode, the input characters does not show on the edit control.</li>
      <li>added support for specifying an any browser as the click-able URL.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#ClickableUrlBrowser">ClickableUrlBrowser</a> and ClickableUrlBrowserArg entries in the teraterm.ini file. The default value is empty.</li>
        </ul></li>
      <li>added the <a href="../menu/window.html#minimize">[Minimize All]</a> and the <a href="../menu/window.html#restore">[Restore All]</a> menu into the <a href="../menu/window.html">[Window]</a> menu.</li>
      <li>added support for the xterm back tab key.
        <ul>
          <li>added the XBackTab entry in the [X function keys] section of the keyboard configuration file.</li>
        </ul></li>
      <li>added support for the <a href="../macro/syntax/types.html#IntegerArray">Integer Array</a>, <a href="../macro/syntax/types.html#StringArray">String Array</a>.</li>
      <li>added the "<a href="../macro/command/getspecialfolder.html">getspecialfolder</a>" macro command.</li>
      <li>adjusted the up and down space size of the shown message at the "<a href="../macro/command/messagebox.html">messagebox</a>", "<a href="../macro/command/inputbox.html">inputbox</a>" and "<a href="../macro/command/statusbox.html">statusbox</a>" macro commands.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The string following after OSC string will not display well.</li>
      <li>When the cursor is hid, the vertical bar shape can not be shown.</li>
      <li>When the keyboard has the AltGr key and the MetaKey=on is configured, the invalid character will be input.</li>
      <li>The zero index of the ANSI color settings can not be loaded.</li>
      <li>XMODEM: The first packet is sent out twice by using the xmodem sending function.</li>
      <li>YMODEM: The received file can not be saved.</li>
      <li>"<a href="../macro/command/ifdefined.html">ifdefined</a>" macro command: When the integer literal is specified, the command mistakenly returns the integer type.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>Modified Tera Term installer script
        <ul>
          <li>Cygterm Here can be launched by the right-click to a opened folder on Windows Vista and 7 later.</li>
        </ul></li>
      <li>upgraded TTSSH to <a href="#ttssh_2.59">2.59</a></li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.11">1.11</a></li>
      <li>upgraded TTXRecurringCommand Plug-in to <a href="#recurringcommand_1.02">1.02</a></li>
      <li>upgraded TTLEditor to 1.4</li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.71">2011.8.31 (Ver 4.71)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>When the OSC string includes a control sequence, the control sequence can be proceeded.</li>
      <li>Eterm look-feel: The wallpaper file format can support any format other than BMP on Windows Vista or later.</li>
      <li>"<a href="../macro/command/getpassword.html">getpassword</a>" macro command is updated.
        <ul>
          <li>The result of the command execution is stored in the system variable "result".</li>
        </ul></li>
      <li>"<a href="../macro/command/strspecial.html">strspecial</a>" macro command is updated.
        <ul>
          <li>added the second argument as the converted string on the strspecial command.</li>
        </ul></li>
      <li>added the "<a href="../macro/command/expandenv.html">expandenv</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The log file which name length is 80 bytes over can not be opened.</li>
      <li>When the meta key is enabled, the Control and Meta key is redundantly inputed.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.58">2.58</a></li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.70">2011.6.26 (Ver 4.70)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>DEC special character font can support the bold and the under line attribute.</li>
      <li>added support for the NetTerm style mouse event tracking.</li>
      <li>added support for ignore the printing control sequence.
        <ul>
          <li>added the <a href="../setup/teraterm-prn.html#ignoremc">PrinterCtrlSequence</a> entry in the teraterm.ini file. The default value is <del>off</del> <ins>on</ins>.</li>
        </ul></li>
      <li>The Meta Key can be only assigned to the left ALT or the right ALT key.</li>
      <li>By using the broadcast command in the real time mode, the Submit button has the only function of acting as &lt;Enter&gt; key.</li>
      <li>The /k option is inherited by using the Duplicate Session.</li>
      <li>added the elapsed time and the transfer speed on the file sending dialog.</li>
      <li>added support for Windows7 jump list.</li>
      <li>Resurrected the special argument of the box-style macro command. However, this option is obsolete. The default is 0 because of backward compatibility.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the mouse cursor position is later 224 line on xterm-style mouse event notification, Tera Term would report the invalid reporting.</li>
      <li>When the 10000 over mode is specified on the DECSET/DECRST control sequence, Tera Term would not be able to ignore.</li>
      <li>The invalid result may be responded for the window position reporting.</li>
      <li>YMODEM: When a file is sent, the block1 can be sent not waiting the ACK from the YMODEM server.</li>
      <li>When a last one byte of a string is removed by using the strremove macro command, the BOF will be occurred.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>Modified Tera Term installer script
        <ul>
          <li>Bug fix: When the CygTerm Here is added in the context menu, the CygTerm Here does not work well with the folder name containing continuing spaces.</li>
        </ul></li>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.57">2.57</a></li>
      <li>upgraded TeraTerm Menu to <a href="#ttmenu_1.10">1.10</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_23">1.07_23</a></li>
      <li>upgraded cyglaunch to <a href="#cyglaunch_1.03">1.03</a></li>
      <li>upgraded LogMeTT to 2.9.9</li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.69">2011.3.5 (Ver 4.69)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for configuring the Terminal ID included in the DA3 control sequence reply.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#TerminalUID">TerminalUID</a> entry in the teraterm.ini file. The default value is FFFFFFFF.</li>
        </ul></li>
      <li>added support for the DECSTUI (Change Terminal Unique ID) control sequence.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#LockTUID">LockTUID</a> entry in the teraterm.ini file. The default value is on.</li>
        </ul></li>
      <li>added support for the DECRQSS (Request terminal setting) control sequence. Supported control sequences are DECSCA, DECSCL, DECSTBM and SGR.</li>
      <li>added support for the DECFI, DECBI control sequences.</li>
      <li>The control sequence requesting window size can reply the actual window size instead of the fixed 480x640 value.</li>
      <li>When the ConfirmChangePaste is enabled, a user is confirmed with pasting the text by using Alt+R accelerator key.
      The ConfirmChangePaste can confirm when only one line is pasted.</li>
      <li>added support for mintty's application escape mode.</li>
      <li>added support for mintty's mouse wheel reporting control control sequence.</li>
      <li>added support for the IME operation control sequence.</li>
      <li>added the "<a href="../macro/command/basename.html">basename</a>" and "<a href="../macro/command/dirname.html">dirname</a>" macro command.</li>
      <li>added the "<a href="../macro/command/getfileattr.html">getfileattr</a>" and "<a href="../macro/command/setfileattr.html">setfileattr</a>" macro command.</li>
      <li>added the "<a href="../macro/command/foldercreate.html">foldercreate</a>", "<a href="../macro/command/folderdelete.html">folderdelete</a>" and "<a href="../macro/command/foldersearch.html">foldersearch</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the terminal width is 257 columns over, Tera Term does not display well.</li>
      <li>When the terminal ID is VT520 and VT525, the Primary DA (DA1) reply is incorrect.</li>
      <li>When the language is other than Japanese, the VT420, VT520 and VT525 on the <a href="../menu/setup-terminal.html">Terminal Setup</a> dialog do not work well.</li>
      <li>When <a href="../setup/teraterm-prn.html#direct">PassThruPort</a> is specified as a local device mapping the network share, Tera Term printing does not work. cf.<a href="http://logmett.com/forum/viewtopic.php?f=2&amp;t=1383">print with WINDOWS 7 net use LPT PERSISTENT:Yes </a></li>
      <li>Tera Term can not ignore the unsupported OSC control string. </li>
      <li>Tera Term can not understand a character after the DCS, SOS, APC and PM Control string.</li>
      <li>When a log file is opened by writable mode, the file is existing and writing by another process can be opened.</li>
      <li>When 8-bit string is received, the string is recognized as the control sequence by mistake.</li>
      <li>Tera Term can not properly send a broadcast message to selected windows by using the broadcast command. cf.<a href="http://logmett.com/forum/viewtopic.php?f=8&amp;t=1601">Broadcast command issue in 4.68 </a></li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.56">2.56</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.18">1.0.0.18</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_22">1.07_22</a></li>
      <li>upgraded LogMeTT to 2.9.8</li>
      <li><del>Add</del><ins>Delete</ins> mutex object for running check by installer.</li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.68">2010.12.7 (Ver 4.68)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for the selective erase.
        <ul>
          <li>added support for the DECSCA (Select character protection attribute), DECSED (Selective Erase in Display), DECSEL (Selective Erase in Line) and DECSERA (Selective Erase Rectangular Area) control sequence.</li>
        </ul></li>
      <li>added support for the DECERA (Erase Rectangular Area) control sequence.</li>
      <li>added support for the DA3 (Tertiary Device Attribute) control sequence.</li>
      <li>added support for the VT420, VT520 and VT525 on the terminal ID settings.
        <ul>
          <li>The DECSCL(terminal mode setting) control sequence can support the VT level 5(vt500 series).</li>
        </ul></li>
      <li>A single character to indicate the window status can be shown on the "Window" menu and "Windows list" dialog. See below.
        <ul>
          <li>+ Normal window</li>
          <li>- Minimized window</li>
          <li>@ Maximized window</li>
          <li># Hidden window</li>
        </ul></li>
      <li>Extended the maximum number of Tera Term window from 50 to 256.</li>
      <li>Extended the maximum number of Tera Term plug-ins from 16 to 32.</li>
      <li>added an argument of the "<a href="../macro/command/beep.html">beep</a>" macro command.</li>
      <li><ins>Deleted the special argument of the box-style macro command.</ins></li>
      <li>The WSAAsyncGetAddrInfo function can be hooked by using plug-in.</li>
      <li>The freeaddrinfo function can be hooked by using plug-in.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>Security fix: A class of vulnerabilities affecting applications that load DLL's in an insecure manner.</li>
      <li>The baud rate can not be properly selected on the <a href="../menu/setup-serialport.html">[Setup]-[Serial port]</a> dialog.</li>
      <li><a href="../setup/teraterm-term.html#beep">Beep setting</a> does not work.</li>
      <li>The scroll region can not be cleared by using the DECALN (DEC Screen Alignment Test) control sequence.</li>
      <li>An empty string can not reply by using the window title and icon label reporting request.</li>
      <li>The rectangle erasing, color changing and line drawing can not work well in the IO-8256 terminal.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.55">2.55</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.17">1.0.0.17</a></li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_19">1.07_19</a></li>
      <li>upgraded cyglaunch to <a href="#cyglaunch_1.02">1.02</a></li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.67">2010.8.31 (Ver 4.67)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added the NextShownWin and PrevShownWin of new shortcut keys in the KEYBOARD.CNF file that display a next or previous window not minimized.</li>
      <li>removed the hidden window from the target windows which switches by the shortcut key NextWin/PrevWin.</li>
      <li>added a new optional setting that can disable the menu for "New connection" and "Duplicate session".
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#DisableMenuNewConnection">DisableMenuNewConnection</a> and <a href="../setup/teraterm-misc.html#DisableMenuDuplicateSession">DisableMenuDuplicateSession</a> in the teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>added a user configuration for changing the cursor color depending on the IME open status.
        <ul>
          <li>A user can change the setup value on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
          <li>added the IMERelatedCursor in the teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>added support for the motion event of xterm style mouse event tracking.</li>
      <li>added support for the DEC Locator Mode style mouse event tracking.</li>
      <li>The ttymouse can automatically setup the xterm2 to modify the response of the Secondary DA. </li>
      <li>added the "<a href="../macro/command/filetruncate.html">filetruncate</a>" macro command.</li>
      <li>added the "<a href="../macro/command/dispstr.html">dispstr</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strinsert.html">strinsert</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strremove.html">strremove</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strreplace.html">strreplace</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strtrim.html">strtrim</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strsplit.html">strsplit</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strjoin.html">strjoin</a>" macro command.</li>
      <li>added the "<a href="../macro/command/strspecial.html">strspecial</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>The YMODEM sending and receiving procedure does not work for the HyperTerminal.</li>
      <li>The file sending is slowing.</li>
      <li>The retransmission EOT does not work well by using the XMODEM protocol.</li>
      <li>In xterm style mouse event tracking mode, the Control and Alt(Meta) keys are reported been swapped.</li>
      <li>The color setup and request control sequence does not work well.</li>
      <li>A statusbox is closed by performing the OK button action.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.54">2.54</a></li>
      <li>upgraded TTLEditor to 1.2.1</li>
      <li>added the French.lng language file. Special thanks to Francois MOCQ.</li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.66">2010.5.31 (Ver 4.66)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>YMODEM support
        <ul>
          <li>added the "YMODEM" under the Transfer of File menu.</li>
          <li>added the YmodemRcvCommand entry in the teraterm.ini file. The default is empty.</li>
          <li>added the "<a href="../macro/command/ymodemrecv.html">ymodemrecv</a>" and "<a href="../macro/command/ymodemsend.html">ymodemsend</a>" macro command.</li>
        </ul></li>
      <li>added support for specifying any baud rate of the serial port connection.
        <ul>
          <li>A user can specify any baud rate at the <a href="../menu/setup-serialport.html">[Setup]-[Serial port]</a> menu.</li>
          <li>A user can specify any baud rate at the <a href="../commandline/teraterm.html#BAUD">/BAUD</a> option.</li>
          <li>A user can specify any baud rate at the "<a href="../macro/command/setbaud.html">setbaud</a>" macro command.</li>
        </ul></li>
      <li>added support for the VPB and HPB control sequence.</li>
      <li>added support for <a href="../usage/tips/vim.html#Bracketed">bracketed paste mode</a>.</li>
      <li>Split the TransBin flag into the Send File and the Log flags.
        <ul>
          <li>added the LogBinary entry in the teraterm.ini file. The default value is off.</li>
        </ul></li>
      <li>Change the cursor color depending on the IME open status.</li>
      <li>Unlock the clipboard while the ConfirmChangePaste dialog is opened.</li>
      <li>added the <a href="../menu/control.html">[Control]-[Show Macro Window]</a> menu to flash the running macro window.</li>
      <li>added the "<a href="../macro/command/filestat.html">filestat</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>Fixed a problem where TeraTerm consumes 100% CPU if a USB serial port is disconnected. Special thanks to Z. Vickery.</li>
      <li>When a user assigns a function to the Alt key in the KEYBOARD.CNF file, the unnecessary string print.</li>
      <li>Fixed a problem the setting of line feed may not be effective at numerical keypad ENTER.</li>
      <li>Line at a time can not work well in English and Russian language. Special thanks to p3g4asus.</li>
      <li>Switching to alternate screen buffer, saving and restoring cursor position do not work correctly.</li>
      <li>By using the "Save Cursor" control sequence, the alternate screen buffer switching and the screen clear execute in the wrong.</li>
      <li>If ClearOnResize setting is on, DECCOLM (Change Column Mode) control sequence does not clear screen.</li>
      <li>VPR control sequence does not work correctly.</li>
      <li>Improved the cancellation logic for XModem and YModem transfers'. Special thanks to Z. Vickery.</li>
      <li>The <a href="../macro/command/crc32.html">crc32file</a> macro command does not work correctly for handling the file opening error. And also, the command supports the read-only file.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.53">2.53</a></li>
    </ul>
  </li>

</ul>

<h3 id="teraterm_4.65">2010.2.20 (Ver 4.65)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>expanded the maximum number of saved host to 500.</li>
      <li>expanded the maximum number of serial connection to 4096.</li>
      <li>added support for the tab character as the command line delimiter.</li>
      <li>enabled the [Show Log dialog] of the <a href="../menu/file.html">[File]</a> menu while the log window is shown.</li>
      <li>added the confirmation parameter at the "<a href="../macro/command/disconnect.html">disconnect</a>" macro command.</li>
      <li>added support for not clearing the terminal screen while resizing.
        <ul>
          <li>A user can change the setup value on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
        </ul></li>
      <li>added support for overwritten confirmation at the "<a href="../macro/command/filenamebox.html">filenamebox</a>" macro command.</li>
      <li>added support for replying an empty string at the window title and the icon label reporting control sequence.
        <ul>
          <li>Changed to the accept, ignore and empty value in the TitleReportSequence entry in the teraterm.ini file.</li>
          <li>changed the default value of "TitleReportSequence" to "empty".</li>
        </ul></li>
      <li>added Control Sequence tab on the <a href="../menu/setup-additional.html">Additional settings dialog</a>
        <ul>
          <li>moved "Accept mouse event tracking request", "Disable mouse event tracking when Control is pressed" and "Accept window title change request" from General tab.</li>
          <li>added "Title report sequence", "Window control sequence", "Window report sequence" and "Cursor control sequence".</li>
        </ul></li>
      <li>added support for alternate screen buffer.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#AltScr">AlternateScreenBuffer</a> entry in the teraterm.ini file. The default value is on.</li>
        </ul></li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>When the Auto Window Close is disabled, the ttermpro.exe can not notify the XTYP_DISCONNECT transaction to the ttpmacro.exe.</li>
      <li><a href="../menu/setup-additional.html">PasteDelayPerLine</a> setting does not work correctly.</li>
      <li>The macro string-type constants can not describe a tab character.</li>
      <li>When the multiple files are sent or received by the Kermit, ZMODEM and QuickVAN protocol, the progress bar can not be reset after the second file. </li>
      <li>The `/*' characters in the macro string-type constants are falsely recognized as a beginning of the C language-style comment.</li>
      <li>Workaround: When the Eterm look-feel is enabled, the screen display can not work after the Reverse Video (DECSCNM) set/reset.</li>
      <li>When the width of the window is shrunk, the invalid character remains at the end of each line.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>stopped to write the new entry to the user's teraterm.ini file by the installer.</li>
      <li>stopped to write the language configuration selected by a user to the user's teraterm.ini file by the installer.</li>
      <li>upgraded CygTerm+ to <a href="#cygterm_1.07_19">1.07_19</a></li>
      <li>upgraded TTXRecurringCommand Plug-in to <a href="#recurringcommand_1.01">1.01</a></li>
      <li>upgraded TTXResizeMenu Plug-in to <a href="#resizemenu_1.01">1.01</a></li>
      <li>upgraded TTXttyrec Plug-in to <a href="#ttyrec_1.02">1.02</a></li>
      <li>added support for Microsoft Windows 7.</li>
      <li>updated the screencapture.ttl file.</li>
      <li>upgraded Oniguruma to 5.9.2</li>
      <li>upgraded OpenSSL to 0.9.8l</li>
    </ul>
  </li>

</ul>


<h3 id="teraterm_4.64">2009.11.10 (Ver 4.64)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>The click-able URL color is able to be painted.</li>
      <li>added configuring the underline attribute to click-able URL string.
        <ul>
          <li>added the check box on <a href="../menu/setup-additional.html">Additional settings dialog</a> dialog.</li>
        </ul></li>
      <li>When the click-able URL is enabled, the mouser cursor is not able to transform.</li>
      <li>sftp/tftp scheme can be linked in a click-able URL.</li>
      <li>The list of open sessions in the Broadcast Command window can support the standard Windows feature of selecting the range of items. It is possible to select consecutive number of items by clicking on the first and then pressing Shift key and clicking on the last. And also, it is possible to select all items by CTRL+A pushing.</li>
      <li>added support for resizing the list box in the Broadcast Command window.</li>
      <li>The list box in the Broadcast Command periodically updates.</li>
      <li>added the status bar at the bottom of the ConfirmChangePaste dialog.</li>
      <li>When a user switches the Tera Term window by using CTRL+TAB key, a new window style is not changed.</li>
      <li>added the "<a href="../macro/command/setdebug.html">setdebug</a>" macro command.</li>
    </ul>
  </li>

  <li>Bug fixes
    <ul>
      <li>fixed the problem that the settings of local echo and line feed before connection may not be effective.</li>
      <li>fixed the problem that the settings of TCPLocalEcho/TCPCRSend in previous connection are not reset in serial connection.</li>
      <li>fixed the problem that the invisible log dialog has focus when Tera Term start logging without displaying log dialog.</li>
      <li><a href="../macro/command/strscan.html">strscan</a> macro command does not work correctly.</li>
      <li>fixed the problem that the c language style comment does not work well.</li>
      <li>fixed the problem that the tcp port number may not display on the window title.</li>
      <li>Bug fix: "<a href="../menu/setup-window.html">Enable bold font</a>" setting is not immediately reflected.</li>
    </ul>
  </li>

  <li>Misc
    <ul>
      <li>Modified Tera Term installer script
        <ul>
          <li>when SSH protocol was linked by the installer, it is able to edit by "File Types" of "Folder Options" on Explorer.</li>
        </ul></li>
      <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.52">2.52</a></li>
      <li>upgraded TTProxy to <a href="#ttproxy_1.0.0.16">1.0.0.16</a></li>
      <li>upgraded LogMeTT to 2.9.7
       <ul>
        <li>Tera Term can access the registry key(HKEY_CURRENT_USER\Software\LogMeTT\InstallPath) to find the path to LogMeTT.</li>
       </ul></li>
    </ul>
  </li>
</ul>

<h3 id="teraterm_4.63">2009.7.5 (Ver 4.63)</h3>
<ul class="history">
  <li>Changes
    <ul>
      <li>added support for cursor control sequences.
        <ul>
          <li>added the <a href="../menu/setup-additional.html#CursorCtrlSequence">CursorCtrlSequence</a> entry in the teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>added support for the control sequences for window operation.
        <ul>
          <li>added the <a href="../setup/teraterm-win.html#WindowCtrlSequence">WindowCtrlSequence</a>, <a href="../setup/teraterm-win.html#WindowReportSequence">WindowReportSequence</a> and <a href="../setup/teraterm-win.html#TitleReportSequence">TitleReportSequence</a> entry in the teraterm.ini file. The default is on.</li>
        </ul></li>
      <li>added support of "Line at a time" mode.
        <ul>
          <li>added the <a href="../setup/teraterm-com.html#linemode">EnableLineMode</a> entry in the teraterm.ini file. The default value is on.</li>
          <li>change the default mode from "Character at a time" to "Line at a time".</li>
        </ul></li>
      <li>added configuring the delay time per a carriage return when a user pastes multiple lines. The default is 10 msec.
        <ul>
          <li>A user can change the setup value on the <a href="../menu/setup-additional.html">Additional settings dialog</a>.</li>
        </ul></li>
      <li>Changed the BroadcastCommand functional specification. When the BroadcastCommand is not the real-time mode, a user can send a message at the selected window in the list box.</li>
      <li>added UTF-8 language
        <ul>
          <li>added the <a href="../commandline/teraterm.html#la">/LA</a> command line option for <a href="../menu/setup-general.html">language mode</a> specification.</li>
        </ul></li>
      <li>In UTF-8 transmission mode, when the input character is recognized as invalid character, Tera Term sends the Replacement Character(U+FFFD).</li>
      <li>changed Korean language implementation
        <ul>
          <li>added support for Korean mode with <a href="../commandline/teraterm.html#la">/LA</a> command line option, which specifies the <a href="../menu/setup-general.html">language mode</a>.</li>
          <li>added support for the IME in-line conversion.</li>
          <li>added the `UTF-8m' selection for the receiving character code.</li>
          <li>added the KS5601 at the KanjiSend and KanjiReceive entry in the teraterm.ini file.</li>
          <li>added the KS5601 in the <a href="../commandline/teraterm.html#kr">/KR</a> and <a href="../commandline/teraterm.html#kt">/KT</a> command line options.
        </ul></li>
      <li>The OS common dialog is shown in the font setup dialog box.
        <ul>
          <li>added the character set (aka "Script") drop-down combo box.</li>
          <li>moved the Enable bold style to <a href="../menu/setup-window.html">[Setup]-[Window]</a>.</li>
          <li>moved the Russian Font char set to <a href="../menu/setup-terminalr.html">[Setup]-[Terminal] for Russian mode</a>.</li>
        </ul></li>
      <li>added the MSB set character by using the Alt key.
        <ul>
          <li>added the <a href="../setup/teraterm-term.html#Meta8Bit">Meta8Bit</a> entry in the teraterm.ini file. The default value is off.</li>
        </ul></li>
      <li>added `&amp;p' parameter to log file name that can convert the tcp port number.</li>
      <li>added the millisecond at the log time-stamp line.</li>
      <li>respond for Secondary DA request only when it has no parameter or parameter 0.</li>
      <li>add experimental support for the motion event of mouse event notify.</li>
      <li>added a new optional setting that can disable the menu for "Send Break". Special thanks to peterprvy.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#DisableMenuSendBreak">DisableMenuSendBreak</a> in the teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>added a new optional setting that can clear the screen when disconnected. Special thanks to peterprvy.
        <ul>
          <li>added <a href="../setup/teraterm-misc.html#ClearScreenOnCloseConnection">ClearScreenOnCloseConnection</a> in teraterm.ini file. The default is off.</li>
        </ul></li>
      <li>added a new optional setting that can disable the accelerator key for the Duplicate session.
        <ul>
          <li>added the <a href="../setup/teraterm-misc.html#DisableAcceleratorSendBreak">DisableAcceleratorDuplicateSession</a> entry in the teraterm.ini file. The default is off.</li>
        </ul></li>