qemu RX

Fork

hw/rx: rx-gdbsim: DTB load address fix.

Linux kernel required alined address of DTB.
But missing align in dtb load function.
Fixed to load to the correct address.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

test/avocado: Update machibe_rx_gdbsim tests.

Since SCI supports continuous data receive, Added that test.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

hw/char/renesas_sci: Add fifo buffer to backend interface.

SCI does not have a fifo, it is necessary to send and receive
at a bit rate speed.
But, qemu's chardev backend does not have a buffer,
so it sends received data continuously.
By buffering the received data with the FIFO, continuous
received data can be received.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

target/rx: gdbstub add acc register operation.

I added it because the operation of the acc register was not implemented.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

target/rx: Fix helper definiton.

Due to an incorrect definition of helper,
TCG optimization could sometimes behave unexpectedly.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Migration Pull request (Take 2)

Hi

This time I have disabled vmstate canary patches form Dave Gilbert.

Let's see if it works.

Later, Juan.
-----BEGIN PGP SIGNATURE-----
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=F/ek
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging

Migration Pull request (Take 2)

Hi

This time I have disabled vmstate canary patches form Dave Gilbert.

Let's see if it works.

Later, Juan.

# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723

* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
-----BEGIN PGP SIGNATURE-----
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=m7N5
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging

target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp

# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

migration: Move temp page setup and cleanup into separate functions

Temp pages will need to grow if we want to have multiple channels for postcopy,
because each channel will need its own temp page to cache huge page data.

Before doing that, cleanup the related code. No functional change intended.

Since at it, touch up the errno handling a little bit on the setup side.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Simplify unqueue_page()

This patch simplifies unqueue_page() on both sides of it (itself, and caller).

Firstly, due to the fact that right after unqueue_page() returned true, we'll
definitely send a huge page (see ram_save_huge_page() call - it will _never_
exit before finish sending that huge page), so unqueue_page() does not need to
jump in small page size if huge page is enabled on the ramblock. IOW, it's
destined that only the 1st 4K page will be valid, when unqueue the 2nd+ time
we'll notice the whole huge page has already been sent anyway. Switching to
operating on huge page reduces a lot of the loops of redundant unqueue_page().

Meanwhile, drop the dirty check. It's not helpful to call test_bit() every
time to jump over clean pages, as ram_save_host_page() has already done so,
while in a faster way (see commit ba1b7c812c ("migration/ram: Optimize
ram_save_host_page()", 2021-05-13)). So that's not necessary too.

Drop the two tracepoints along the way - based on above analysis it's very
possible that no one is really using it..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Add postcopy_has_request()

Add a helper to detect whether postcopy has pending request.

Since at it, cleanup the code a bit, e.g. in unqueue_page() we shouldn't need
to check it again on queue empty because we're the only one (besides cleanup
code, which should never run during this process) that will take a request off
the list, so the request list can only grow but not shrink under the hood.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat

This patch allows us to read the tid even without blocktime feature enabled.
It's useful when tracing postcopy fault thread on faulted pages to show thread
id too with the address.

Remove the comments - they're merely not helpful at all.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: No off-by-one for pss->page update in host page size

We used to do off-by-one fixup for pss->page when finished one host huge page
transfer. That seems to be unnecesary at all. Drop it.

Cc: Keqian Zhu <zhukeqian1@huawei.com>
Cc: Kunkun Jiang <jiangkunkun@huawei.com>
Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Tally pre-copy, downtime and post-copy bytes independently

Provide information on the number of bytes copied in the pre-copy,
downtime and post-copy phases of migration.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Introduce ram_transferred_add()

Replace direct manipulation of ram_counters.transferred with a
function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_send_discard_bm_ram()

postcopy_send_discard_bm_ram() always return zero. Since it can't
fail, simplify and do not return anything.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop return code for disgard ram process

It will just never fail. Drop those return values where they're constantly
zeros.

A tiny touch-up on the tracepoint so trace_ram_postcopy_send_discard_bitmap()
is called after the logic itself (which sounds more reasonable).

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Do chunk page in postcopy_each_ram_send_discard()

Right now we loop ramblocks for twice, the 1st time chunk the dirty bits with
huge page information; the 2nd time we send the discard ranges. That's not
necessary - we can do them in a single loop.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop postcopy_chunk_hostpages()

This function calls three functions:

- postcopy_discard_send_init(ms, block->idstr);
- postcopy_chunk_hostpages_pass(ms, block);
- postcopy_discard_send_finish(ms);

However only the 2nd function call is meaningful. It's major role is to make
sure dirty bits are applied in host-page-size granule, so there will be no
partial dirty bits set for a whole host page if huge pages are used.

The 1st/3rd call are for latter when we want to send the disgard ranges.
They're mostly no-op here besides some tracepoints (which are misleading!).

Drop them, then we can directly drop postcopy_chunk_hostpages() as a whole
because we can call postcopy_chunk_hostpages_pass() directly.

There're still some nice comments above postcopy_chunk_hostpages() that explain
what it does. Copy it over to the caller's site.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Don't return for postcopy_chunk_hostpages()

It always return zero, because it just can't go wrong so far. Simplify the
code with no functional change.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration: Drop dead code of ram_debug_dump_bitmap()

I planned to add "#ifdef DEBUG_POSTCOPY" around the function too because
otherwise it'll be compiled into qemu binary even if it'll never be used. Then
I found that maybe it's easier to just drop it for good..

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/ram: clean up unused comment.

Just a removal of an unused comment.
a0a8aa147aa did many fixes and removed the parameter named "ms", but forget to remove the corresponding comment in function named "ram_save_host_page".

Signed-off-by: Xu Zheng <xuzheng@cmss.chinamobile.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>

migration: Report the error returned when save_live_iterate fails

Should qemu_savevm_state_iterate() encounter a failure when calling a
particular save_live_iterate function, report the error code returned
by the function.

Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished

The MIGRATION_STATUS_ACTIVE indicates that migration is running.
Remove it to be handled by the default operation,
It should be part of the unknown ending states.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Avoid COLO boot in postcopy migration

COLO dose not support postcopy migration and remove the Fixme.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

migration/migration.c: Add missed default error handler for migration state

In the migration_completion() no other status is expected, for
example MIGRATION_STATUS_CANCELLING, MIGRATION_STATUS_CANCELLED, etc.

Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Remove unnecessary minimum_version_id_old fields

The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)

We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.

Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

Signed-off-by: Juan Quintela <quintela@redhat.com>

---

It missed vmstate_ppc_cpu.

multifd: Rename pages_used to normal_pages

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: recv side only needs the RAMBlock host address

So we can remove the MultiFDPages.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

multifd: Use normal pages array on the recv side

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

---

Rename num_normal_pages to total_normal_pages (peter)

multifd: Use normal pages array on the send side

We are only sending normal pages through multifd channels.
Later on this series, we are going to also send zero pages.
We are going to detect if a page is zero or non zero in the multifd
channel thread, not on the main thread.

So we receive an array of pages page->offset[N]

And we will end with:

p->normal[N - zero_pages]
p->zero[zero_pages].

In this patch, we just copy all the pages in offset to normal.

for (i = 0; i < pages->num; i++) {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}

Later in the series this becomes:

for (i = 0; i < pages->num; i++) {
if (buffer_is_zero(page->offset[i])) {
p->zerol[p->zero_num] = pages->offset[i];
p->zero_num++:
} else {
p->narmal[p->normal_num] = pages->offset[i];
p->normal_num++:
}
}

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

---

Improving comment (dave)
Renaming num_normal_pages to total_normal_pages (peter)